Snyk Agent Scan

Discover and scan agent components on your machine for prompt injections
and vulnerabilities (including agents, MCP servers, skills).

NEW Read our technical report on the emerging threats of the agent skill eco-system published together with Agent Scan 0.4, which adds support for scanning agent skills.

Agent Scan helps you keep an inventory of all your installed agent components (harnesses, MCP servers, and skills) and scans them for common threats like prompt injections, sensitive data handling, or malware payloads hidden in natural language. By default it focuses on MCP servers; add --skills to autodiscover and scan agent skills.

Security Warning

⚠️ IMPORTANT: Scanning MCP configurations will execute the commands defined in them.

When Agent Scan scans an MCP configuration file, it starts the stdio MCP servers by executing the commands and arguments specified in the config. This is necessary to retrieve tool descriptions and perform security analysis.

Recommendations:

Run scans inside a sandbox (Docker container, VM, or disposable environment) when evaluating untrusted or third-party MCP configs

Review the consent prompt carefully during interactive scans, it shows the exact command and arguments that will be executed for each server

Use --dangerously-run-mcp-servers only in trusted environments where you've verified all MCP server commands

By default, Agent Scan requires explicit user consent (y/n) before starting each stdio MCP server during interactive runs. This gives you control over what gets executed on your system.

Highlights

Auto-discover MCP configurations, agent tools, skills
Scanning of Claude, Cursor, Windsurf, Gemini CLI, Amp, Amazon Q, and other agents.
Detects 15+ distinct security risks across MCP servers and agent skills:
- MCP: Prompt Injection, Tool Poisoning, Tool Shadowing, Toxic Flows
- Skills: Prompt Injection, Malware Payloads, Untrusted Content, Credential Handling, Hardcoded Secrets

Supported agents and capabilities

Agent Scan auto-discovers agents and their capabilities (MCP servers or skills) when their install paths exist. The table reflects well-known agent definitions.

✓: at least one path is defined for that capability.
✗: the agent is listed for that OS but has no paths for that capability.
—: that agent is not included for that OS.
Skills columns apply when using --skills.

Agent	macOS MCP	macOS Skills	Linux MCP	Linux Skills	Windows MCP	Windows Skills
Windsurf	✓	✓	✓	✓	✓	✓
Cursor	✓	✓	✓	✓	✓	✓
VS Code	✓	✓	✓	✓	✓	✓
Claude Desktop	✓	✗	—	—	✓	✗
Claude Code	✓	✓	✓	✓	✓	✓
Gemini CLI	✓	✓	✓	✓	✓	✓
OpenClaw	✗	✓	✗	✓	✗	✓
Amp	✗	✓	✗	✓	✗	✓
Kiro	✓	✗	✓	✗	✓	✗
OpenCode	✗	✗	✗	✗	✗	✗
Antigravity	✓	✗	✓	✗	✓	✗
Codex	✗	✓	✗	✓	—	—
Amazon Q	✓	✗	✓	✗	—	—

Quick Start

To get started:

Sign up at Snyk and get an API token from https://app.snyk.io/account (API Token → KEY → click to show).
Set the token as an environment variable before running any scan:
```
export SNYK_TOKEN=your-api-token-here
```
Have uv installed on your system.

Scanning

To run a full scan of your machine (auto-discovers agents, MCP servers, skills), run:

uvx snyk-agent-scan@latest

This will scan for security vulnerabilities in MCP servers, tools, prompts, and resources. It will automatically discover a variety of agent configurations, including Claude Code/Desktop, Cursor, Gemini CLI, and Windsurf.

To also auto-discover and scan agent skills, pass the --skills flag:

uvx snyk-agent-scan@latest --skills

You can also scan particular MCP configuration files or skills:

# scan a specific mcp configuration
uvx snyk-agent-scan@latest ~/.vscode/mcp.json
# scan a single agent skill
uvx snyk-agent-scan@latest --skills ~/path/to/my/SKILL.md
# scan all claude skills
uvx snyk-agent-scan@latest --skills ~/.claude/skills

Example Run

Scanner Capabilities

Agent Scan is a security scanning tool to both scan and inspect the supply chain of agent components on your machine. It scans for common security vulnerabilities like prompt injections, tool poisoning, toxic flows, or vulnerabilities in agent skills.

Agent Scan operates in two main modes which can be used jointly or separately:

Scan Mode: The CLI command snyk-agent-scan scans the current machine for agents and agent components such as skills and MCP servers. Upon completion, it will output a comprehensive report for the user to review.
Background Mode (MDM, Crowdstrike). Agent Scan scans the machine in regular intervals in the background, and reports the results to a Snyk Evo instance. This can be used by security teams to monitor the company-wide agent supply chain in a central location. To set this up, please contact us.

How It Works

Scanning

Agent Scan searches through your local agent's configuration files to find agents, skills, and MCP servers. For MCP, it connects to servers and retrieves tool descriptions.

Interactive Consent for MCP Servers

⚠️ Security Note: Scanning an MCP config executes the commands defined in it. Always review what will be executed before approving.

By default, Agent Scan prompts for user consent before starting each stdio MCP server during interactive runs. This consent flow:

Shows the server name, command, and environment variables (redacted) that will be executed
Allows you to approve or decline each server individually
Prevents potentially untrusted servers from running without your explicit permission
Records declined servers with a user_declined error (they are never started)

Best Practices:

Review the command and arguments carefully before approving
When scanning untrusted or third-party MCP configs, run Agent Scan inside a sandbox (Docker, VM, or disposable environment)
Decline any servers with unfamiliar or suspicious commands

For non-interactive environments (e.g., CI/CD pipelines), you must use the --dangerously-run-mcp-servers flag to bypass the consent prompt and start all servers automatically. Only use this flag in trusted environments where all MCP server commands have been verified.

Analysis and Validation

Agent Scan validates the components, both with local checks and by invoking the Agent Scan API. For this, skills, agent applications, tool names, and descriptions are shared with Snyk. By using Agent Scan, you agree to the Snyk terms of use for Agent Scan.

A unique, persistent, and anonymous ID is assigned to your scans for analysis. You can opt out of sending this information using the --opt-out flag.

Agent Scan does not store or log any usage data, i.e. the contents and results of your MCP tool calls.

CLI Parameters

Agent Scan provides the following commands:

snyk-agent-scan - Security scanner for agents, MCP servers, and skills

Common Options

These options are available for all commands:

--storage-file FILE    Path to store scan results and scanner state (default: ~/.mcp-scan)
--base-url URL         Base URL for the verification server
--verbose              Enable detailed logging output
--print-errors         Show error details and tracebacks
--json                 Output results in JSON format instead of rich text

Commands

scan (default)

Scan MCP configurations for security vulnerabilities in tools, prompts, and resources.

snyk-agent-scan scan [CONFIG_FILE...]

Options:

--skills                          Also scan agent skills (default: off)
--checks-per-server NUM           Number of checks to perform on each server (default: 1)
--server-timeout SECONDS          Seconds to wait before timing out server connections (default: 10)
--suppress-mcpserver-io BOOL      Suppress stderr from stdio MCP servers (stdout carries the JSON-RPC protocol
                                  and is never shown). Default: False for interactive runs (stderr is streamed
                                  with a [server-name] prefix), True otherwise.
--dangerously-run-mcp-servers     ⚠️ DANGER: Skip the interactive consent prompt and automatically start every
                                  stdio MCP server listed in the scanned configs. Only use in trusted
                                  environments where you've verified all MCP server commands.

inspect

Print descriptions of tools, prompts, and resources without verification.

snyk-agent-scan inspect [CONFIG_FILE...]

Options:

--server-timeout SECONDS          Seconds to wait before timing out server connections (default: 10)
--suppress-mcpserver-io BOOL      Suppress stderr from stdio MCP servers (stdout carries the JSON-RPC protocol
                                  and is never shown). Default: False for interactive runs (stderr is streamed
                                  with a [server-name] prefix), True otherwise.
--dangerously-run-mcp-servers     ⚠️ DANGER: Skip the interactive consent prompt and automatically start every
                                  stdio MCP server listed in the scanned configs. Only use in trusted
                                  environments where you've verified all MCP server commands.

help

Display detailed help information and examples.

snyk-agent-scan help

Examples

# Scan all known MCP configs
snyk-agent-scan

# Scan all known MCP configs and agent skills
snyk-agent-scan --skills

# Scan a specific config file
snyk-agent-scan ~/custom/config.json

# Scan a specific skill file
snyk-agent-scan --skills ~/path/to/my/SKILL.md

# Scan a directory for skills
snyk-agent-scan --skills ~/.claude/skills

# Just inspect tools without verification
snyk-agent-scan inspect

# Skip consent prompts and run all servers (ONLY for CI/CD or fully trusted environments)
snyk-agent-scan --dangerously-run-mcp-servers

# Suppress MCP server stderr output during scanning
snyk-agent-scan --suppress-mcpserver-io=true

# CI mode (requires --dangerously-run-mcp-servers in non-interactive environments)
snyk-agent-scan --ci --dangerously-run-mcp-servers

Demo

This repository includes a vulnerable MCP server that can demonstrate Model Context Protocol security issues that Agent Scan finds.

How to demo MCP security issues?

Clone this repository
Create an mcp.json config file in the cloned git repository root directory with the following contents:

{
  "mcpServers": {
    "Demo MCP Server": {
      "type": "stdio",
      "command": "uv",
      "args": ["run", "mcp", "run", "demoserver/server.py"],
    },
  },
}

Run Agent Scan: uvx --python 3.13 snyk-agent-scan@latest scan --full-toxic-flows mcp.json

Note: if you place the mcp.json configuration filepath elsewhere then adjust the args path inside the MCP server configuration to reflect the path to the MCP Server (demoserver/server.py) as well as the uvx command that runs Agent Scan with the correct filepath to mcp.json.

Agent Scan is closed to contributions

Agent Scan does not accept external contributions at this time.

We welcome suggestions, bug reports, or feature requests as GitHub issues.

Development Setup

To run Agent Scan from source, follow these steps:

uv run pip install -e .
uv run -m src.agent_scan.cli

Including Agent Scan results in your own project / registry

If you want to include Agent Scan results in your own project or registry, please reach out. There are designated APIs for this purpose. Using the standard Agent Scan API for large scale scanning is considered abuse and will result in your account being blocked.

Documentation

Scanning — How scanning works, CLI parameters, and usage examples.
Issue Codes — Reference for all security issues detected by Agent Scan.

Changelog

See CHANGELOG.md.

Name		Name	Last commit message	Last commit date
Latest commit History 486 Commits
.circleci		.circleci
.devcontainer		.devcontainer
.github		.github
demoserver		demoserver
docs		docs
src/agent_scan		src/agent_scan
tests		tests
.flake8		.flake8
.gitignore		.gitignore
.pre-commit-config.yaml		.pre-commit-config.yaml
.python-version		.python-version
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
SECURITY.md		SECURITY.md
TERMS.md		TERMS.md
catalog-info.yaml		catalog-info.yaml
demo.svg		demo.svg
pyproject.toml		pyproject.toml
uv.lock		uv.lock

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Snyk Agent Scan

Security Warning

Highlights

Supported agents and capabilities

Quick Start

Scanning

Example Run

Scanner Capabilities

How It Works

Scanning

Interactive Consent for MCP Servers

Analysis and Validation

CLI Parameters

Common Options

Commands

scan (default)

inspect

help

Examples

Demo

Agent Scan is closed to contributions

Development Setup

Including Agent Scan results in your own project / registry

Documentation

Further Reading

Changelog

About

Uh oh!

Releases 73

Contributors

Uh oh!

Languages

Folders and files

Latest commit

History

Repository files navigation

Snyk Agent Scan

Security Warning

Highlights

Supported agents and capabilities

Quick Start

Scanning

Example Run

Scanner Capabilities

How It Works

Scanning

Interactive Consent for MCP Servers

Analysis and Validation

CLI Parameters

Common Options

Commands

scan (default)

inspect

help

Examples

Demo

Agent Scan is closed to contributions

Development Setup

Including Agent Scan results in your own project / registry

Documentation

Further Reading

Changelog

About

Topics

Resources

License

Security policy

Uh oh!

Stars

Watchers

Forks

Releases 73

Contributors

Uh oh!

Languages