phy: qcom: edp: Fix the DP_PHY_AUX_CFG registers count and Add v8 DP-specific qserdes register offsets and Add Glymur platform support

Documentation/devicetree/bindings/display/bridge/lontium,lt8713sx.yaml

@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt8713sx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT8713SX Type-C/DP1.4 to Type-C/DP1.4/HDMI2.0/DP++ bridge-hub
+
+maintainers:
+  - Tony <syyang@lontium.com>
+
+description:
+  The Lontium LT8713SX is a Type-C/DP1.4 to Type-C/DP1.4/HDMI2.0 converter
+  that integrates one DP input and up to three configurable output interfaces
+  (DP1.4 / HDMI2.0 / DP++), with SST/MST functionality and audio support.
+
+properties:
+  compatible:
+    enum:
+      - lontium,lt8713sx
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Regulator for 3.3V vcc.
+
+  vdd-supply:
+    description: Regulator for 1.1V vdd.
+
+  reset-gpios:
+    description: GPIO connected to active low RESET pin.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          DP port for DP input from soc to bridge chip
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          DP port for DP output from bridge
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional DP port for DP output from bridge
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        bridge@4f {
+            compatible = "lontium,lt8713sx";
+            reg = <0x4f>;
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    lt8713sx_dp_in: endpoint {
+                        remote-endpoint = <&mdss_dp0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    lt8713sx_dp0_out: endpoint {
+                        remote-endpoint = <&dp0_connector_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    lt8713sx_dp1_out: endpoint {
+                        remote-endpoint = <&dp1_connector_in>;
+                    };
+                };
+            };
+        };
+    };

Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml

@@ -4,19 +4,20 @@
 $id: http://devicetree.org/schemas/display/bridge/lontium,lt9211.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge.
+title: Lontium LT9211/LT9211C DSI/LVDS/DPI to DSI/LVDS/DPI bridge.
 
 maintainers:
   - Marek Vasut <marex@denx.de>
 
 description: |
-  The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS
+  The LT9211 and LT9211C are bridge devices which convert Single/Dual-Link DSI/LVDS
   or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI.
 
 properties:
   compatible:
     enum:
       - lontium,lt9211
+      - lontium,lt9211c
 
   reg:
     maxItems: 1
@@ -91,6 +92,43 @@ examples:
 
         vccio-supply = <&lt9211_1v8>;
 
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@2 {
+            reg = <2>;
+
+            endpoint {
+              remote-endpoint = <&panel_in_lvds>;
+            };
+          };
+        };
+      };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      lvds-bridge@3b {
+        compatible = "lontium,lt9211c";
+        reg = <0x3b>;
+
+        reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+
+        vccio-supply = <&lt9211c_1v8>;
+
         ports {
           #address-cells = <1>;
           #size-cells = <0>;

Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml

@@ -45,6 +45,11 @@ properties:
               - qcom,sm8650-dsi-ctrl
               - qcom,sm8750-dsi-ctrl
           - const: qcom,mdss-dsi-ctrl
+      - items:
+          - enum:
+              - qcom,qcs8300-dsi-ctrl
+          - const: qcom,sa8775p-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
       - enum:
           - qcom,dsi-ctrl-6g-qcm2290
           - qcom,mdss-dsi-ctrl # This should always come with an SoC-specific compatible

Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml

@@ -14,18 +14,24 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - qcom,dsi-phy-7nm
-      - qcom,dsi-phy-7nm-8150
-      - qcom,sa8775p-dsi-phy-5nm
-      - qcom,sar2130p-dsi-phy-5nm
-      - qcom,sc7280-dsi-phy-7nm
-      - qcom,sm6375-dsi-phy-7nm
-      - qcom,sm8350-dsi-phy-5nm
-      - qcom,sm8450-dsi-phy-5nm
-      - qcom,sm8550-dsi-phy-4nm
-      - qcom,sm8650-dsi-phy-4nm
-      - qcom,sm8750-dsi-phy-3nm
+    oneOf:
+      - items:
+          - enum:
+              - qcom,dsi-phy-7nm
+              - qcom,dsi-phy-7nm-8150
+              - qcom,sa8775p-dsi-phy-5nm
+              - qcom,sar2130p-dsi-phy-5nm
+              - qcom,sc7280-dsi-phy-7nm
+              - qcom,sm6375-dsi-phy-7nm
+              - qcom,sm8350-dsi-phy-5nm
+              - qcom,sm8450-dsi-phy-5nm
+              - qcom,sm8550-dsi-phy-4nm
+              - qcom,sm8650-dsi-phy-4nm
+              - qcom,sm8750-dsi-phy-3nm
+      - items:
+          - enum:
+              - qcom,qcs8300-dsi-phy-5nm
+          - const: qcom,sa8775p-dsi-phy-5nm
 
   reg:
     items:

Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml

@@ -53,13 +53,23 @@ patternProperties:
         contains:
           const: qcom,qcs8300-dp
 
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,qcs8300-dsi-ctrl
+
   "^phy@[0-9a-f]+$":
     type: object
     additionalProperties: true
     properties:
       compatible:
         contains:
-          const: qcom,qcs8300-edp-phy
+          enum:
+            - qcom,qcs8300-dsi-phy-5nm
+            - qcom,qcs8300-edp-phy
 
 required:
   - compatible
@@ -71,6 +81,7 @@ examples:
     #include <dt-bindings/interconnect/qcom,icc.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/qcom,qcs8300-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
     #include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
     #include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h>
     #include <dt-bindings/power/qcom,rpmhpd.h>
@@ -142,6 +153,13 @@ examples:
                          remote-endpoint = <&mdss_dp0_in>;
                     };
                 };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss_dsi0_in>;
+                    };
+                };
             };
 
             mdp_opp_table: opp-table {
@@ -169,6 +187,88 @@ examples:
             };
         };
 
+        dsi@ae94000 {
+            compatible = "qcom,qcs8300-dsi-ctrl",
+                         "qcom,sa8775p-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc MDSS_DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc MDSS_DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc MDSS_DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc MDSS_DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc MDSS_DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc MDSS_DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+            phys = <&mdss_dsi0_phy>;
+
+            operating-points-v2 = <&dsi0_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            vdda-supply = <&vreg_l5a>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss0_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss0_dsi0_out: endpoint { };
+                };
+            };
+
+            dsi0_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss_dsi0_phy: phy@ae94400 {
+            compatible = "qcom,qcs8300-dsi-phy-5nm",
+                         "qcom,sa8775p-dsi-phy-5nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x27c>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&vreg_l4a>;
+        };
+
         mdss_dp0_phy: phy@aec2a00 {
             compatible = "qcom,qcs8300-edp-phy", "qcom,sa8775p-edp-phy";
 

Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml

@@ -200,9 +200,11 @@ examples:
                   <0x0aec2000 0x1c8>;
 
             clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
-                     <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>;
+                     <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_EDP_REF_CLKREF_EN>;
             clock-names = "aux",
-                          "cfg_ahb";
+                          "cfg_ahb",
+                          "ref";
 
             #clock-cells = <1>;
             #phy-cells = <0>;