Glymur v7 display +gpu+ keyboard + pcie4 6 dissable + qref#694
Open
pradyot7 wants to merge 16 commits intoqualcomm-linux:tech/all/dt/glymurfrom
Open
Glymur v7 display +gpu+ keyboard + pcie4 6 dissable + qref#694pradyot7 wants to merge 16 commits intoqualcomm-linux:tech/all/dt/glymurfrom
pradyot7 wants to merge 16 commits intoqualcomm-linux:tech/all/dt/glymurfrom
Conversation
Document Glymur SoC bindings and Compute Reference Device (CRD) board id Link: https://lore.kernel.org/all/20260205-upstream_v3_glymur_introduction-v7-1-849e7a9e6888@oss.qualcomm.com/ Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com> Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Introduce the base device tree support for Glymur – Qualcomm's next-generation compute SoC. The new glymur.dtsi describes the core SoC components, including: - CPUs and CPU topology - Interrupt controller and TLMM - GCC,DISPCC and RPMHCC clock controllers - Reserved memory and interconnects - APPS and PCIe SMMU and firmware SCM - Watchdog, RPMHPD, APPS RSC and SRAM - PSCI and PMU nodes - QUPv3 serial engines - CPU power domains and idle states, plus SCMI/ SRAM pieces for CPU DVFS - PDP0 mailbox, IPCC and AOSS - Display clock controller - SPMI PMIC arbiter with SPMI0/1/2 buses - SMP2P nodes - TSENS and thermal zones (8 instances, 92 sensors) Add dtsi files for PMH0101, PMK8850, PMCX0102, SMB2370, PMH0104, PMH0110, PMIC's along with temp-alarm and GPIO nodes needed on Glymur Enabled PCIe controllers and associated PHY to support boot to shell with nvme storage, List of PCIe instances enabled: - PCIe3b - PCIe4 - PCIe5 - PCIe6 Link: https://lore.kernel.org/all/20260205-upstream_v3_glymur_introduction-v7-3-849e7a9e6888@oss.qualcomm.com/ Co-developed-by: Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com> Signed-off-by: Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com> Co-developed-by: Maulik Shah <maulik.shah@oss.qualcomm.com> Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com> Co-developed-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Co-developed-by: Taniya Das <taniya.das@oss.qualcomm.com> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com> Co-developed-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com> Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com> Co-developed-by: Qiang Yu <qiang.yu@oss.qualcomm.com> Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com> Co-developed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Co-developed-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@oss.qualcomm.com> Signed-off-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@oss.qualcomm.com> Co-developed-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com> Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com> Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Add initial device tree support for the Glymur Compute Reference Device(CRD) board, with this board dts glymur crd can boot to shell with rootfs on nvme and uart21 as serial console Features enabled are: - Board and sleep clocks - Volume up/down keys - Regulators 0 - 4 - Power supplies and sideband signals (PERST, WAKE, CLKREQ) for PCIe3b/4/5/6 controllers and PHYs Link: https://lore.kernel.org/all/20260205-upstream_v3_glymur_introduction-v7-4-849e7a9e6888@oss.qualcomm.com/ Co-developed-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com> Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com> Co-developed-by: Qiang Yu <qiang.yu@oss.qualcomm.com> Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com> Co-developed-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Co-developed-by: Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com> Signed-off-by: Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
The Glymur USB system contains 3 USB type C ports, 1 USB multiport controller and a USB 2.0 only controller. This encompasses 5 SS USB QMP PHYs (3 combo and 2 uni) and 6 M31 eUSB2 PHYs. All controllers are SNPS DWC3 based, so describe them as flattened DWC3 QCOM nodes. Link: https://lore.kernel.org/all/20260113-dts-qcom-glymur-add-usb-support-v1-2-98d6d387df01@oss.qualcomm.com/#r Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com> Co-developed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
The Qualcomm Glymur Compute Reference Device comes with 3 Type-C ports, one USB Type-A, and a fingerprint reader connected over USB. Each of these 3 Type-C ports are connected to one of the USB combo PHYs and one of the M31 eUSB2 PHYs. The Type-A is connected to the USB Multi-port controller via one of the M31 eUSB2 PHYs and one combo PHY. The fingerprint reader is connected to the USB_2 controller. All M31 eUSB2 PHYs have associated eUSB2 to USB 2.0 repeaters, which are either part of SMB2360 PMICs or dedicated NXP PTN3222. So enable all needed controllers, PHYs and repeaters, while describing their supplies. Also describe the PMIC glink graph for Type-C connectors. Link: https://lore.kernel.org/all/20260113-dts-qcom-glymur-add-usb-support-v1-3-98d6d387df01@oss.qualcomm.com/ Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com> Co-developed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Add remoteproc PAS loader for ADSP and CDSP with its fastrpc nodes. Link: https://lore.kernel.org/lkml/20260129001358.770053-5-sibi.sankar@oss.qualcomm.com/ Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Enable ADSP and CDSP on Glymur CRD board. Link: https://lore.kernel.org/lkml/20260129001358.770053-6-sibi.sankar@oss.qualcomm.com/ Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Add CoreSight nodes to enable trace paths like TPDM->ETF/STM->ETF. These devices are part of the AOSS, CDSP, QDSS, PCIe5, TraceNoc and some small subsystems, such as GCC, IPCC, PMU and so on. Link: https://lore.kernel.org/all/20251230-add-coresight-nodes-for-glymur-v1-1-103b6d24f1ca@oss.qualcomm.com/ Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
This reverts commit 74e83f3. QDSS causing bootup issue Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
The MDSS (Mobile Display SubSystem) on Glymur comes with 4 DisplayPort controllers. Describe them along with display controller and the eDP PHY. Then, attach the combo PHYs link and vco_div clocks to the Display clock controller and link up the PHYs and DP endpoints in the graph. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Enable the MDSS (Mobile Display SubSystem) along with the 3rd DisplayPort controller and its PHY in order to bring support for the panel on Glymur CRD platform. Also describe the voltage regulator needed by the eDP panel. Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Enable keyboard, trackpad and touchscreen Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Add the nodes to describe GPU clock controller and the GPU SMMU node Signed-off-by: Rajendra Nayak <rajendra.nayak@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
The Adreno X2 series GPU present in Glymur SoC belongs to the A8x family. It is a new HW IP with architectural improvements as well as different set of hw configs like GMEM, num SPs, Caches sizes etc. Add the GPU and GMU nodes to describe this hardware. Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
…stability Dissabled Pcie4 and pcie6 for Debian instability Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
…r PCIe PHY on Glymur Add refgen and qref power supplies in each pcie phy devicetree node. For some instance, refgen and qref may share LDOs with phy LDOs, so add additional power supplies Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
jiegan0107
force-pushed
the
tech/all/dt/glymur
branch
2 times, most recently
from
5f5f303 to
95ce79d
Compare
QuinAsura
force-pushed
the
tech/all/dt/glymur
branch
from
708f691 to
6de23f8
Compare
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
6 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Glymur v7 display +gpu+ keyboard + pcie4 6 dissable + qref