Add Minikube Setup Instructions to Quickstart Documentation

docs/content/en/docs-dev/quickstart/_index.md

@@ -18,6 +18,37 @@ Note:
 ### Prerequisites
 - Having a Kubernetes cluster and connect to it via [kubectl](https://kubernetes.io/docs/tasks/tools/install-kubectl/).
 
+#### Setting Up a Kubernetes Cluster with Minikube
+
+If you don't already have a Kubernetes cluster, you can create a local one using Minikube (recommended for local development and testing).
+
+**Installation:**
+
+Follow the [official installation guide](https://minikube.sigs.k8s.io/docs/start/).
+
+**Starting a Cluster:**
+
+```bash
+minikube start
+```
+
+**Verifying the Setup:**
+
+```bash
+kubectl cluster-info
+kubectl get nodes
+```
+
+If the cluster is running correctly, you should see a node with `STATUS` as `Ready`.
+
+Your local Kubernetes cluster is now ready. You can proceed with the PipeCD installation steps below.
+
+**Troubleshooting:**
+
+If you encounter driver-related issues, ensure that a supported driver is installed and running. See [supported drivers](https://minikube.sigs.k8s.io/docs/drivers/).
+
+For more details, refer to the [Minikube documentation](https://minikube.sigs.k8s.io/docs/).
+
 ### 1. Installing PipeCD in quickstart mode
 
 Across the [PipeCD concepts](/docs/concepts/), PipeCD platform is constructed by 2 components: Control Plane and Piped (the agent).

docs/content/en/docs-v0.55.x/quickstart/_index.md

@@ -18,6 +18,37 @@ Note:
 ### Prerequisites
 - Having a Kubernetes cluster and connect to it via [kubectl](https://kubernetes.io/docs/tasks/tools/install-kubectl/).
 
+#### Setting Up a Kubernetes Cluster with Minikube
+
+If you don't already have a Kubernetes cluster, you can create a local one using Minikube (recommended for local development and testing).
+
+**Installation:**
+
+Follow the [official installation guide](https://minikube.sigs.k8s.io/docs/start/).
+
+**Starting a Cluster:**
+
+```bash
+minikube start
+```
+
+**Verifying the Setup:**
+
+```bash
+kubectl cluster-info
+kubectl get nodes
+```
+
+If the cluster is running correctly, you should see a node with `STATUS` as `Ready`.
+
+Your local Kubernetes cluster is now ready. You can proceed with the PipeCD installation steps below.
+
+**Troubleshooting:**
+
+If you encounter driver-related issues, ensure that a supported driver is installed and running. See [supported drivers](https://minikube.sigs.k8s.io/docs/drivers/).
+
+For more details, refer to the [Minikube documentation](https://minikube.sigs.k8s.io/docs/).
+
 ### 1. Installing PipeCD in quickstart mode
 
 Across the [PipeCD concepts](/docs/concepts/), PipeCD platform is constructed by 2 components: Control Plane and Piped (the agent).

docs/content/en/docs-v0.56.x/quickstart/_index.md

@@ -18,6 +18,37 @@ Note:
 ### Prerequisites
 - Having a Kubernetes cluster and connect to it via [kubectl](https://kubernetes.io/docs/tasks/tools/install-kubectl/).
 
+#### Setting Up a Kubernetes Cluster with Minikube
+
+If you don't already have a Kubernetes cluster, you can create a local one using Minikube (recommended for local development and testing).
+
+**Installation:**
+
+Follow the [official installation guide](https://minikube.sigs.k8s.io/docs/start/).
+
+**Starting a Cluster:**
+
+```bash
+minikube start
+```
+
+**Verifying the Setup:**
+
+```bash
+kubectl cluster-info
+kubectl get nodes
+```
+
+If the cluster is running correctly, you should see a node with `STATUS` as `Ready`.
+
+Your local Kubernetes cluster is now ready. You can proceed with the PipeCD installation steps below.
+
+**Troubleshooting:**
+
+If you encounter driver-related issues, ensure that a supported driver is installed and running. See [supported drivers](https://minikube.sigs.k8s.io/docs/drivers/).
+
+For more details, refer to the [Minikube documentation](https://minikube.sigs.k8s.io/docs/).
+
 ### 1. Installing PipeCD in quickstart mode
 
 Across the [PipeCD concepts](/docs/concepts/), PipeCD platform is constructed by 2 components: Control Plane and Piped (the agent).

docs/content/en/docs-v1.0.x/quickstart/_index.md

@@ -26,6 +26,37 @@ In this quickstart, you’ll install both components on a Kubernetes cluster and
 - A running Kubernetes cluster.  
 - [`kubectl`](https://kubernetes.io/docs/tasks/tools/install-kubectl/) installed and configured to connect to your cluster.
 
+#### Setting Up a Kubernetes Cluster with Minikube
+
+If you don't already have a Kubernetes cluster, you can create a local one using Minikube (recommended for local development and testing).
+
+**Installation:**
+
+Follow the [official installation guide](https://minikube.sigs.k8s.io/docs/start/).
+
+**Starting a Cluster:**
+
+```bash
+minikube start
+```
+
+**Verifying the Setup:**
+
+```bash
+kubectl cluster-info
+kubectl get nodes
+```
+
+If the cluster is running correctly, you should see a node with `STATUS` as `Ready`.
+
+Your local Kubernetes cluster is now ready. You can proceed with the PipeCD installation steps below.
+
+**Troubleshooting:**
+
+If you encounter driver-related issues, ensure that a supported driver is installed and running. See [supported drivers](https://minikube.sigs.k8s.io/docs/drivers/).
+
+For more details, refer to the [Minikube documentation](https://minikube.sigs.k8s.io/docs/).
+
 ---
 
 ### 1. Installation