New Crowdin updates

docs/CROWDIN/cs/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/de/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. Nach der zweiten oder dritten Wiederholung erhälst Du die Möglichkeit, den Pod zu entfernen.
 4. Sobald der alte Pod gelöscht ist, kannst Du einen neuen Pod aktivieren.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/el/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/es/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/fr/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/he/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/ko/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/lt/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/nl/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/pb/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/pl/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/pt/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/ro/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/ru/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/sk/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/tr/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. After the second or third retry you will get the option to remove the pod.
 4. Once the old pod is removed you will be able to activate a new pod.
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/zh_CN/CompatiblePumps/OmnipodDASH.md

@@ -572,6 +572,18 @@ To remove the old pod session:
 3. 经过两到三次重试后，系统将提供移除储药器的选项。
 4. 待旧储药器移除后，即可激活新储药器。
 
+### Generic error: java.lan.illegalStateException: Trying to set a Bluetooth Address to ***, but it is already set to ***.
+
+If you receive this error when attempting to Initialize a new pod **AAPS** fails as it still has settings for an old pod stored in configuration.
+
+![omnipod_address_in_use](../images/DASH_images/Errors/omnipod_address_in_use.png)
+
+This can happen if you restore from a backup, or a pod deactivation fails.
+
+To resolve keep clicking on `RETRY` until a `Discard` option is shown, then discard. This procedure should work for De-Activating a pod too.
+
+You should now be able to Activate a new pod.
+
 ---
 ### Reinstalling AAPS
 

docs/CROWDIN/zh_TW/AdvancedOptions/Autotune.md

@@ -8,17 +8,17 @@ Autotune 外掛自 [3.4](#version3400) 版起在 AAPS 釋出中提供，但預
 
 ## 顯示 Autotune 外掛
 
-Create an empty file named `enable_autotune` in the `extra` subfolder of your phone [AAPS directory](#preferences-maintenance-settings).
+在手機的 [AAPS 目錄](#preferences-maintenance-settings) 下的 `extra` 子資料夾中，建立一個名為 `enable_autotune` 的空白檔案。
 
-***NOTE: Ensure you check in the **AAPS** settings where your AAPS Directory is, and that you placed the file in the correct one, a number of several have been caught out putting the file into the wrong folder.***
+***注意：請在 **AAPS** 設定中確認你的 AAPS 目錄位置，並確定你把檔案放在正確的目錄裡。已有多人因把檔案放錯資料夾而受影響。***
 
 ![啟用 Autotune](../images/Autotune/Autotune_0.png)
 
 重新啟動 AAPS 後，Autotune 會顯示在組態建置工具中。
 
 ![自動調整外掛](../images/Autotune/Autotune_1.png)
 
-***NOTE: If you are unable to see the `Autotune` option you will need to click the highlighted (red box) arrow to expand and show all settings in the `General` section.***
+***注意：若看不到 `Autotune` 選項，請點擊標示（紅框）的箭頭展開，以顯示 `General` 區段中的所有設定。***
 
 ## Autotune 使用者介面
 

docs/CROWDIN/zh_TW/CompatiblePumps/MedtrumNano.md

@@ -45,15 +45,15 @@
 
 ### 步驟1：選擇Medtrum幫浦
 
-#### Option 1: New installations
+#### 選項 1：新安裝
 
 如果你是首次安裝AAPS，**安裝嚮導**將引導你完成AAPS的安裝過程。 當你到達幫浦選擇時，請選擇「Medtrum」。
 
 如果有疑問，你也可以選擇「虛擬幫浦」，並在設置完成後選擇「Medtrum」（見選項2）。
 
 ![安裝嚮導](../images/medtrum/SetupWizard.png)
 
-#### Option 2: The Config Builder
+#### 選項 2：組態建置工具
 
 在現有安裝中，可以在[組態建置工具 > 幫浦](#Config-Builder-pump)中選擇**Medtrum**幫浦：