[26Q2]: Add Calculated Power Channel Python Example

examples/analog_in/calculated_power_acq_int_clk.py

@@ -0,0 +1,28 @@
+"""Example of analog input calculated power acquisition.
+
+This example demonstrates how to acquire a finite amount
+of calculated power data using the DAQ device's internal clock.
+
+Supported Devices:
+
+- PXIe-4311 (DAQmx 26.3.0 or later)
+"""
+
+import nidaqmx
+from nidaqmx.constants import READ_ALL_AVAILABLE, AcquisitionType
+
+with nidaqmx.Task() as task:
+    task.ai_channels.add_ai_calculated_power_chan(
+        voltage_physical_channel="Dev1/ai0",
+        current_physical_channel="Dev1/ai1",
+        voltage_min_val=0.0,
+        voltage_max_val=5.0,
+        current_min_val=0.0,
+        current_max_val=0.02,
+        ext_shunt_resistor_val=249.0,
+    )
+
+    task.timing.cfg_samp_clk_timing(1000.0, sample_mode=AcquisitionType.FINITE, samps_per_chan=50)
+
+    data = task.read(READ_ALL_AVAILABLE)
+    print("Acquired data: [" + ", ".join(f"{value:f}" for value in data) + "]")

examples/analog_in/cont_calculated_power_acq_int_clk.py

@@ -0,0 +1,39 @@
+"""Example of analog input calculated power acquisition.
+
+This example demonstrates how to acquire a continuous amount of
+calculated power data using the DAQ device's internal clock.
+
+Supported Devices:
+
+- PXIe-4311 (DAQmx 26.3.0 or later)
+"""
+
+import nidaqmx
+from nidaqmx.constants import AcquisitionType
+
+with nidaqmx.Task() as task:
+    task.ai_channels.add_ai_calculated_power_chan(
+        voltage_physical_channel="Dev1/ai0",
+        current_physical_channel="Dev1/ai1",
+        voltage_min_val=0.0,
+        voltage_max_val=5.0,
+        current_min_val=0.0,
+        current_max_val=0.02,
+        ext_shunt_resistor_val=249.0,
+    )
+    task.timing.cfg_samp_clk_timing(1000.0, sample_mode=AcquisitionType.CONTINUOUS)
+    task.start()
+    print("Running task. Press Ctrl+C to stop.")
+
+    try:
+        total_read = 0
+        while True:
+            data = task.read(number_of_samples_per_channel=1000)
+            read = len(data)
+            total_read += read
+            print(f"Acquired data: {read} samples. Total {total_read}.", end="\r")
+    except KeyboardInterrupt:
+        pass
+    finally:
+        task.stop()
+        print(f"\nAcquired {total_read} total samples.")