Releases: meshcore-dev/MeshCore
Room Server Firmware v1.15.0
https://blog.meshcore.io/2026/04/19/release-1-15-0
- Default Scope support
- Support for New GROUP_DATA (binary) packets #1928 #2130
- Heltec V4.3 support #1867
- Heltec nRF Tracker (T096) support #2097
- GAT562 Mesh EVB Pro repeater and room server support #2042
- Radio rxgain now ON by default #2124
- Radio freq range now supported down to 150Mhz #2126
- GPS pref peristence fix #2018
- New get|set dutycycle CLI command #1961
- Muzi Works R1 Neo support #2007
- GAT562 Watch support #2138 #2228
- BME680 sensor init fix #2227
- Heltec Wireless Paper battery read fix #2164
- WiFi companion fixes for Heltec V4,TBeam 1W #1833
- Waveshare RP2040: RXEN fix #2298
- nRF companion, support for OTA updates #2323
- Added companion for Heltec Wireless Paper #2315
- Misc #2134 #2190 #1425 #2075 #2302 #2306
- Xiao C3 bootloop fix #2328
Repeater Firmware v1.15.0
https://blog.meshcore.io/2026/04/19/release-1-15-0
- Default Scope support
- Support for New GROUP_DATA (binary) packets #1928 #2130
- Heltec V4.3 support #1867
- Heltec nRF Tracker (T096) support #2097
- GAT562 Mesh EVB Pro repeater and room server support #2042
- Radio rxgain now ON by default #2124
- Radio freq range now supported down to 150Mhz #2126
- GPS pref peristence fix #2018
- New get|set dutycycle CLI command #1961
- Muzi Works R1 Neo support #2007
- GAT562 Watch support #2138 #2228
- BME680 sensor init fix #2227
- Heltec Wireless Paper battery read fix #2164
- WiFi companion fixes for Heltec V4,TBeam 1W #1833
- Waveshare RP2040: RXEN fix #2298
- nRF companion, support for OTA updates #2323
- Added companion for Heltec Wireless Paper #2315
- Misc #2134 #2190 #1425 #2075 #2302 #2306
- Xiao C3 bootloop fix #2328
Companion Firmware v1.15.0
https://blog.meshcore.io/2026/04/19/release-1-15-0
- Default Scope support
- Support for New GROUP_DATA (binary) packets #1928 #2130
- Heltec V4.3 support #1867
- Heltec nRF Tracker (T096) support #2097
- GAT562 Mesh EVB Pro repeater and room server support #2042
- Radio rxgain now ON by default #2124
- Radio freq range now supported down to 150Mhz #2126
- GPS pref peristence fix #2018
- New get|set dutycycle CLI command #1961
- Muzi Works R1 Neo support #2007
- GAT562 Watch support #2138 #2228
- BME680 sensor init fix #2227
- Heltec Wireless Paper battery read fix #2164
- WiFi companion fixes for Heltec V4,TBeam 1W #1833
- Waveshare RP2040: RXEN fix #2298
- nRF companion, support for OTA updates #2323
- Added companion for Heltec Wireless Paper #2315
- Misc #2134 #2190 #1425 #2075 #2302 #2306
- Xiao C3 bootloop fix #2328
Room Server Firmware v1.14.1
change log:
Added GPS support for SenseCAP Solar P1 in #1589
Power off switch long press support for SenseCAP Solar P1 #1871
Added nRF52 power management for RAK3401 in #1984
Added token bucket based duty cycle enforcement in #1297
Added support for new GAT562 30S Mesh Kit device in #2009
Added support for new GAT562 Mesh Tracker Pro device in #1980
Added LNA toggle CLI commands radio.rxgain on and radio.rxgain off in #1653
Added MCU temperature to telemetry responses from room servers in #2052
Migrated Heltec Tracker v2 to KCT8103L in #1936
Nodes with GPS enabled will now auto sync time every 30 minutes in #1350
Fixed bug where some queued packets would not get transmit in #1877
Fixed bug where automatic adverts were not using the configured multibyte path setting in fcfdc5f
Repeater Firmware v1.14.1
change log:
Added GPS support for SenseCAP Solar P1 in #1589
Power off switch long press support for SenseCAP Solar P1 #1871
Added nRF52 power management for RAK3401 in #1984
Added token bucket based duty cycle enforcement in #1297
Added support for new GAT562 30S Mesh Kit device in #2009
Added support for new GAT562 Mesh Tracker Pro device in #1980
Added LNA toggle CLI commands radio.rxgain on and radio.rxgain off in #1653
Added MCU temperature to telemetry responses from room servers in #2052
Migrated Heltec Tracker v2 to KCT8103L in #1936
Nodes with GPS enabled will now auto sync time every 30 minutes in #1350
Fixed bug where some queued packets would not get transmit in #1877
Fixed bug where automatic adverts were not using the configured multibyte path setting in fcfdc5f
Companion Firmware v1.14.1
change log:
Added GPS support for SenseCAP Solar P1 in #1589
Added nRF52 power management for RAK3401 in #1984
Added token bucket based duty cycle enforcement in #1297
Added support for new GAT562 30S Mesh Kit device in #2009
Added support for new GAT562 Mesh Tracker Pro device in #1980
Added LNA toggle CLI commands radio.rxgain on and radio.rxgain off in #1653
Added MCU temperature to telemetry responses from room servers in #2052
Migrated Heltec Tracker v2 to KCT8103L in #1936
Fixed bug where some queued packets would not get transmit in #1877
Fixed bug where BLE would stay on if turned off from companion screen when already connected in #1991
Room Server Firmware v1.14.0
Change log:
- multibyte path hash support
- new radio AGC reset implementation
- HeltecV4 power fixes
- RAK3401 power optimisations
- Heltec Tracker V2 power fixes
Repeater Firmware v1.14.0
Change log:
- multibyte path hash support
- new CLI command: “get/set loop.detect …”
- new CLI command: “get/set path.hash.mode …”
- new CLI command: “get bootloader.ver”
- new CLI command: “discover.neighbors”
- new radio AGC reset implementation
- HeltecV4 power fixes
- RAK3401 power optimisations
- Heltec Tracker V2 power fixes
Companion Firmware v1.14.0
Change log:
- multibyte path hash support
- new ‘auto add max hops’ preference
- new radio AGC reset implementation
- HeltecV4 power fixes
- RAK3401 power optimisations
- Heltec Tracker V2 power fixes
Room Server Firmware v1.13.0
Change log:
- Thinknode M3 fixes
- new boards: T-Beam 1W, M5 Stack C6
- nRF board sleep optimisations
- Heltec V4: improved RX sensitivity, low power fixes
- WIO Tracker L1 Grove sensor support