Fixed No battery reading on Heltec Wireless Paper 1.2 companion #1262

README.md

@@ -97,10 +97,10 @@ Here are some general principals you should try to adhere to:
 
 There are a number of fairly major features in the pipeline, with no particular time-frames attached yet. In very rough chronological order:
 - [X] Companion radio: UI redesign
-- [ ] Repeater + Room Server: add ACL's (like Sensor Node has)
-- [ ] Standardise Bridge mode for repeaters
+- [X] Repeater + Room Server: add ACL's (like Sensor Node has)
+- [X] Standardise Bridge mode for repeaters
 - [ ] Repeater/Bridge: Standardise the Transport Codes for zoning/filtering
-- [ ] Core + Repeater: enhanced zero-hop neighbour discovery
+- [X] Core + Repeater: enhanced zero-hop neighbour discovery
 - [ ] Core: round-trip manual path support
 - [ ] Companion + Apps: support for multiple sub-meshes (and 'off-grid' client repeat mode)
 - [ ] Core + Apps: support for LZW message compression
@@ -113,12 +113,3 @@ There are a number of fairly major features in the pipeline, with no particular
 - Report bugs and request features on the [GitHub Issues](https://github.com/ripplebiz/MeshCore/issues) page.
 - Find additional guides and components on [my site](https://buymeacoffee.com/ripplebiz).
 - Join [MeshCore Discord](https://discord.gg/BMwCtwHj5V) to chat with the developers and get help from the community.
-
-## RAK Wireless Board Support in PlatformIO
-
-Before building/flashing the RAK4631 targets in this project, there is, unfortunately, some patching you have to do to your platformIO packages to make it work. There is a guide here on the process:
-   [RAK Wireless: How to Perform Installation of Board Support Package in PlatformIO](https://learn.rakwireless.com/hc/en-us/articles/26687276346775-How-To-Perform-Installation-of-Board-Support-Package-in-PlatformIO)
-
-After building, you will need to convert the output firmware.hex file into a .uf2 file you can copy over to your RAK4631 device (after doing a full erase) by using the command `uf2conv.py -f 0xADA52840 -c firmware.hex` with the python script available from:
-   [GitHub: Microsoft - uf2](https://github.com/Microsoft/uf2/blob/master/utils/uf2conv.py)
-