v2.1.0-ls217

CI Report:

https://ci-tests.linuxserver.io/linuxserver/syncthing/v2.1.0-ls217/index.html

LinuxServer Changes:

Full Changelog: v2.0.16-ls216...v2.1.0-ls217

Remote Changes:

Major changes in 2.1

• Devices and folders can now be grouped in the GUI by setting the new
  group attribute.

• HTTP and HTTPS proxies with support for CONNECT can now be used, in
  addition to the existing support for SOCKS proxies (the environment
  variable all_proxy=https://...).

• Block indexing can be turned off for folders where it's more desirable to
  optimise for reduced database size and overhead than minimal transfer
  size (the blockIndexing attribute on folder configuration).

• GUI login session duration can be configured to be longer or shorter than
  the default one week, or set to infinitely long. The cookie path can also
  be adjusted. (The sessionCookieDurationS and sessionCookiePath
  attributes in the GUI configuration.)

This release is also available as:

• APT repository: https://apt.syncthing.net/

• Docker image: docker.io/syncthing/syncthing:2.1.0 or ghcr.io/syncthing/syncthing:2.1.0
  ({docker,ghcr}.io/syncthing/syncthing:2 to follow just the major version)

What's Changed

Fixes

• fix(stdiscosrv): close file descriptor on flush error in write by @cuiweixie in syncthing/syncthing#10615
• fix(gui): disable autocomplete for folder password by @bt90 in syncthing/syncthing#10342
• fix(protocol): limit size of incoming request messages by @calmh in syncthing/syncthing#10629
• fix(gui): don't show local device under remote devices (ref #10563) by @maen-bn in syncthing/syncthing#10631
• fix(gui): order folders alphabetically and ensure local device stays hidden (ref #10563, ref #10631) by @maen-bn in syncthing/syncthing#10637
• fix(gui): fallback to folder ID when label is empty in remove dialog by @RealCharlesChia in syncthing/syncthing#10657
• fix(gui): fix tabs visually disabled but still clickable during ignore patterns setup (fixes #10634) by @JRNitre in syncthing/syncthing#10651
• fix(strelaysrv): properly use bind address for outgoing requests (fixes #10658) by @calmh in syncthing/syncthing#10659
• fix(stdiscosrv): only read certificate proxy headers with --http by @calmh in syncthing/syncthing#10674

Features

• feat(gui, config): support simple folder grouping (fixes #2070) by @maen-bn in syncthing/syncthing#10563
• feat: make http session cookie path & duration configurable by @vvaswani in syncthing/syncthing#10632
• feat(dialer): add HTTP/HTTPS proxy support via CONNECT by @luizluca in syncthing/syncthing#10572
• feat: make block indexing configurable by @calmh in syncthing/syncthing#10608

Other

• chore: remove tracking inode change time by @calmh in syncthing/syncthing#10579
• build(deps): temporarily switch to fork of gateway discovery library (fixes #10593) by @marbens-arch in syncthing/syncthing#10594
• build: extract github.ref_name expression to env mapping by @dagecko in syncthing/syncthing#10624
• build: pin 20 third-party actions to immutable commit SHAs by @dagecko in syncthing/syncthing#10625
• build: have dependabot group PRs and use cooldown by @calmh in syncthing/syncthing#10630
• chore: trivial fixes by @calmh in syncthing/syncthing#10650
• chore(model): more efficient tracking of renames during scan by @calmh in syncthing/syncthing#10653
• chore(model): deflake cluster config tests by @calmh in syncthing/syncthing#10662
• chore(model): deflake TestCompletionEmptyGlobal by @calmh in syncthing/syncthing#10663
• chore(scanner): deflake TestStopWalk by @calmh in syncthing/syncthing#10664
• build: parallelise linux builds slightly by @calmh in syncthing/syncthing#10666
• chore(api): deflake TestHTTPLogin on Windows by @calmh in syncthing/syncthing#10667
• chore(api): use ldap package escape functions by @calmh in syncthing/syncthing#10672
• build: only run the periodic build jobs in the syncthing org by @calmh in syncthing/syncthing#10675
• build(deps): update dependencies by @calmh in syncthing/syncthing#10683
• chore(model): slightly improve handling of pulling empty blocks by @calmh in syncthing/syncthing#10679
• chore(gui): upgrade jQuery to 3.7.1 to fix CVE-2020-11022, CVE-2020-11023, CVE-2015-9251 by @Umer-Azaz in syncthing/syncthing#10673
• chore(fs): remove unused SymlinksSupported() method by @calmh in syncthing/syncthing#10684

New Contributors

• @cuiweixie made their first contribution in syncthing/syncthing#10615
• @dagecko made their first contribution in syncthing/syncthing#10624
• @maen-bn made their first contribution in syncthing/syncthing#10563
• @RealCharlesChia made their first contribution in syncthing/syncthing#10657
• @JRNitre made their first contribution in syncthing/syncthing#10651
• @vvaswani made their first contribution in syncthing/syncthing#10632
• @luizluca made their first contribution in syncthing/syncthing#10572
• @Umer-Azaz made their first contribution in syncthing/syncthing#10673

Full Changelog: syncthing/syncthing@v2.0.16...v2.1.0

v2.0.16-ls216

CI Report:

https://ci-tests.linuxserver.io/linuxserver/syncthing/v2.0.16-ls216/index.html

LinuxServer Changes:

Full Changelog: v2.0.16-ls215...v2.0.16-ls216

Remote Changes:

Major changes in 2.0

• Database backend switched from LevelDB to SQLite. There is a migration on
  first launch which can be lengthy for larger setups. The new database is
  easier to understand and maintain and, hopefully, less buggy.

• The logging format has changed to use structured log entries (a message
  plus several key-value pairs). Additionally, we can now control the log
  level per package, and a new log level WARNING has been inserted between
  INFO and ERROR (which was previously known as WARNING...). The INFO level
  has become more verbose, indicating the sync actions taken by Syncthing. A
  new command line flag --log-level sets the default log level for all
  packages, and the STTRACE environment variable and GUI has been updated
  to set log levels per package. The --verbose and --logflags command
  line options have been removed and will be ignored if given.

• Deleted items are no longer kept forever in the database, instead they are
  forgotten after fifteen months. If your use case require deletes to take
  effect after more than a fifteen month delay, set the
  --db-delete-retention-interval command line option or corresponding
  environment variable to zero, or a longer time interval of your choosing.

• Modernised command line options parsing. Old single-dash long options are
  no longer supported, e.g. -home must be given as --home. Some options
  have been renamed, others have become subcommands. All serve options are
  now also accepted as environment variables. See syncthing --help and
  syncthing serve --help for details.

• Rolling hash detection of shifted data is no longer supported as this
  effectively never helped. Instead, scanning and syncing is faster and more
  efficient without it.

• A "default folder" is no longer created on first startup.

• Multiple connections are now used by default between v2 devices. The new
  default value is to use three connections: one for index metadata and two
  for data exchange.

• The following platforms unfortunately no longer get prebuilt binaries for
  download at syncthing.net and on GitHub, due to complexities related to
  cross compilation with SQLite:

  • dragonfly/amd64
  • solaris/amd64
  • linux/ppc64
  • netbsd/*
  • openbsd/386 and openbsd/arm
  • windows/arm

• The handling of conflict resolution involving deleted files has changed. A
  delete can now be the winning outcome of conflict resolution, resulting in
  the deleted file being moved to a conflict copy.

This release is also available as:

• APT repository: https://apt.syncthing.net/

• Docker image: docker.io/syncthing/syncthing:2.0.16 or ghcr.io/syncthing/syncthing:2.0.16
  ({docker,ghcr}.io/syncthing/syncthing:2 to follow just the major version)

What's Changed

Fixes

• fix(protocol): verify compressed message length before decompression by @calmh in syncthing/syncthing#10595
• fix(systemd): support overrides for syncOwnership by @Valloric in syncthing/syncthing#10602
• fix(systemd): add back chown allowed syscalls by @Valloric in syncthing/syncthing#10605

Other

• chore(config, connections): use same reconnection interval for QUIC and TCP (fixes #10507) by @marbens-arch in syncthing/syncthing#10573
• build(deps): update dependencies by @calmh in syncthing/syncthing#10588
• chore(sqlite): reduce max open connections, keep them open permanently (fixes #10592) by @calmh in syncthing/syncthing#10596

Full Changelog: syncthing/syncthing@v2.0.15...v2.0.16

v2.0.16-ls215

CI Report:

https://ci-tests.linuxserver.io/linuxserver/syncthing/v2.0.16-ls215/index.html

LinuxServer Changes:

Full Changelog: v2.0.16-ls214...v2.0.16-ls215

Remote Changes:

Major changes in 2.0

• Database backend switched from LevelDB to SQLite. There is a migration on
  first launch which can be lengthy for larger setups. The new database is
  easier to understand and maintain and, hopefully, less buggy.

• The logging format has changed to use structured log entries (a message
  plus several key-value pairs). Additionally, we can now control the log
  level per package, and a new log level WARNING has been inserted between
  INFO and ERROR (which was previously known as WARNING...). The INFO level
  has become more verbose, indicating the sync actions taken by Syncthing. A
  new command line flag --log-level sets the default log level for all
  packages, and the STTRACE environment variable and GUI has been updated
  to set log levels per package. The --verbose and --logflags command
  line options have been removed and will be ignored if given.

• Deleted items are no longer kept forever in the database, instead they are
  forgotten after fifteen months. If your use case require deletes to take
  effect after more than a fifteen month delay, set the
  --db-delete-retention-interval command line option or corresponding
  environment variable to zero, or a longer time interval of your choosing.

• Modernised command line options parsing. Old single-dash long options are
  no longer supported, e.g. -home must be given as --home. Some options
  have been renamed, others have become subcommands. All serve options are
  now also accepted as environment variables. See syncthing --help and
  syncthing serve --help for details.

• Rolling hash detection of shifted data is no longer supported as this
  effectively never helped. Instead, scanning and syncing is faster and more
  efficient without it.

• A "default folder" is no longer created on first startup.

• Multiple connections are now used by default between v2 devices. The new
  default value is to use three connections: one for index metadata and two
  for data exchange.

• The following platforms unfortunately no longer get prebuilt binaries for
  download at syncthing.net and on GitHub, due to complexities related to
  cross compilation with SQLite:

  • dragonfly/amd64
  • solaris/amd64
  • linux/ppc64
  • netbsd/*
  • openbsd/386 and openbsd/arm
  • windows/arm

• The handling of conflict resolution involving deleted files has changed. A
  delete can now be the winning outcome of conflict resolution, resulting in
  the deleted file being moved to a conflict copy.

This release is also available as:

• APT repository: https://apt.syncthing.net/

• Docker image: docker.io/syncthing/syncthing:2.0.16 or ghcr.io/syncthing/syncthing:2.0.16
  ({docker,ghcr}.io/syncthing/syncthing:2 to follow just the major version)

What's Changed

Fixes

• fix(protocol): verify compressed message length before decompression by @calmh in syncthing/syncthing#10595
• fix(systemd): support overrides for syncOwnership by @Valloric in syncthing/syncthing#10602
• fix(systemd): add back chown allowed syscalls by @Valloric in syncthing/syncthing#10605

Other

• chore(config, connections): use same reconnection interval for QUIC and TCP (fixes #10507) by @marbens-arch in syncthing/syncthing#10573
• build(deps): update dependencies by @calmh in syncthing/syncthing#10588
• chore(sqlite): reduce max open connections, keep them open permanently (fixes #10592) by @calmh in syncthing/syncthing#10596

Full Changelog: syncthing/syncthing@v2.0.15...v2.0.16

v2.0.16-ls214

CI Report:

https://ci-tests.linuxserver.io/linuxserver/syncthing/v2.0.16-ls214/index.html

LinuxServer Changes:

Full Changelog: v2.0.16-ls213...v2.0.16-ls214

Remote Changes:

Major changes in 2.0

• Database backend switched from LevelDB to SQLite. There is a migration on
  first launch which can be lengthy for larger setups. The new database is
  easier to understand and maintain and, hopefully, less buggy.

• The logging format has changed to use structured log entries (a message
  plus several key-value pairs). Additionally, we can now control the log
  level per package, and a new log level WARNING has been inserted between
  INFO and ERROR (which was previously known as WARNING...). The INFO level
  has become more verbose, indicating the sync actions taken by Syncthing. A
  new command line flag --log-level sets the default log level for all
  packages, and the STTRACE environment variable and GUI has been updated
  to set log levels per package. The --verbose and --logflags command
  line options have been removed and will be ignored if given.

• Deleted items are no longer kept forever in the database, instead they are
  forgotten after fifteen months. If your use case require deletes to take
  effect after more than a fifteen month delay, set the
  --db-delete-retention-interval command line option or corresponding
  environment variable to zero, or a longer time interval of your choosing.

• Modernised command line options parsing. Old single-dash long options are
  no longer supported, e.g. -home must be given as --home. Some options
  have been renamed, others have become subcommands. All serve options are
  now also accepted as environment variables. See syncthing --help and
  syncthing serve --help for details.

• Rolling hash detection of shifted data is no longer supported as this
  effectively never helped. Instead, scanning and syncing is faster and more
  efficient without it.

• A "default folder" is no longer created on first startup.

• Multiple connections are now used by default between v2 devices. The new
  default value is to use three connections: one for index metadata and two
  for data exchange.

• The following platforms unfortunately no longer get prebuilt binaries for
  download at syncthing.net and on GitHub, due to complexities related to
  cross compilation with SQLite:

  • dragonfly/amd64
  • solaris/amd64
  • linux/ppc64
  • netbsd/*
  • openbsd/386 and openbsd/arm
  • windows/arm

• The handling of conflict resolution involving deleted files has changed. A
  delete can now be the winning outcome of conflict resolution, resulting in
  the deleted file being moved to a conflict copy.

This release is also available as:

• APT repository: https://apt.syncthing.net/

• Docker image: docker.io/syncthing/syncthing:2.0.16 or ghcr.io/syncthing/syncthing:2.0.16
  ({docker,ghcr}.io/syncthing/syncthing:2 to follow just the major version)

What's Changed

Fixes

• fix(protocol): verify compressed message length before decompression by @calmh in syncthing/syncthing#10595
• fix(systemd): support overrides for syncOwnership by @Valloric in syncthing/syncthing#10602
• fix(systemd): add back chown allowed syscalls by @Valloric in syncthing/syncthing#10605

Other

• chore(config, connections): use same reconnection interval for QUIC and TCP (fixes #10507) by @marbens-arch in syncthing/syncthing#10573
• build(deps): update dependencies by @calmh in syncthing/syncthing#10588
• chore(sqlite): reduce max open connections, keep them open permanently (fixes #10592) by @calmh in syncthing/syncthing#10596

Full Changelog: syncthing/syncthing@v2.0.15...v2.0.16

v2.0.16-ls213

CI Report:

https://ci-tests.linuxserver.io/linuxserver/syncthing/v2.0.16-ls213/index.html

LinuxServer Changes:

Full Changelog: v2.0.15-ls212...v2.0.16-ls213

Remote Changes:

Major changes in 2.0

• Database backend switched from LevelDB to SQLite. There is a migration on
  first launch which can be lengthy for larger setups. The new database is
  easier to understand and maintain and, hopefully, less buggy.

• The logging format has changed to use structured log entries (a message
  plus several key-value pairs). Additionally, we can now control the log
  level per package, and a new log level WARNING has been inserted between
  INFO and ERROR (which was previously known as WARNING...). The INFO level
  has become more verbose, indicating the sync actions taken by Syncthing. A
  new command line flag --log-level sets the default log level for all
  packages, and the STTRACE environment variable and GUI has been updated
  to set log levels per package. The --verbose and --logflags command
  line options have been removed and will be ignored if given.

• Deleted items are no longer kept forever in the database, instead they are
  forgotten after fifteen months. If your use case require deletes to take
  effect after more than a fifteen month delay, set the
  --db-delete-retention-interval command line option or corresponding
  environment variable to zero, or a longer time interval of your choosing.

• Modernised command line options parsing. Old single-dash long options are
  no longer supported, e.g. -home must be given as --home. Some options
  have been renamed, others have become subcommands. All serve options are
  now also accepted as environment variables. See syncthing --help and
  syncthing serve --help for details.

• Rolling hash detection of shifted data is no longer supported as this
  effectively never helped. Instead, scanning and syncing is faster and more
  efficient without it.

• A "default folder" is no longer created on first startup.

• Multiple connections are now used by default between v2 devices. The new
  default value is to use three connections: one for index metadata and two
  for data exchange.

• The following platforms unfortunately no longer get prebuilt binaries for
  download at syncthing.net and on GitHub, due to complexities related to
  cross compilation with SQLite:

  • dragonfly/amd64
  • solaris/amd64
  • linux/ppc64
  • netbsd/*
  • openbsd/386 and openbsd/arm
  • windows/arm

• The handling of conflict resolution involving deleted files has changed. A
  delete can now be the winning outcome of conflict resolution, resulting in
  the deleted file being moved to a conflict copy.

This release is also available as:

• APT repository: https://apt.syncthing.net/

• Docker image: docker.io/syncthing/syncthing:2.0.16 or ghcr.io/syncthing/syncthing:2.0.16
  ({docker,ghcr}.io/syncthing/syncthing:2 to follow just the major version)

What's Changed

Fixes

• fix(protocol): verify compressed message length before decompression by @calmh in syncthing/syncthing#10595
• fix(systemd): support overrides for syncOwnership by @Valloric in syncthing/syncthing#10602
• fix(systemd): add back chown allowed syscalls by @Valloric in syncthing/syncthing#10605

Other

• chore(config, connections): use same reconnection interval for QUIC and TCP (fixes #10507) by @marbens-arch in syncthing/syncthing#10573
• build(deps): update dependencies by @calmh in syncthing/syncthing#10588
• chore(sqlite): reduce max open connections, keep them open permanently (fixes #10592) by @calmh in syncthing/syncthing#10596

Full Changelog: syncthing/syncthing@v2.0.15...v2.0.16

v2.0.15-ls212

CI Report:

https://ci-tests.linuxserver.io/linuxserver/syncthing/v2.0.15-ls212/index.html

LinuxServer Changes:

Full Changelog: v2.0.15-ls211...v2.0.15-ls212

Remote Changes:

Major changes in 2.0

• Database backend switched from LevelDB to SQLite. There is a migration on
  first launch which can be lengthy for larger setups. The new database is
  easier to understand and maintain and, hopefully, less buggy.

• The logging format has changed to use structured log entries (a message
  plus several key-value pairs). Additionally, we can now control the log
  level per package, and a new log level WARNING has been inserted between
  INFO and ERROR (which was previously known as WARNING...). The INFO level
  has become more verbose, indicating the sync actions taken by Syncthing. A
  new command line flag --log-level sets the default log level for all
  packages, and the STTRACE environment variable and GUI has been updated
  to set log levels per package. The --verbose and --logflags command
  line options have been removed and will be ignored if given.

• Deleted items are no longer kept forever in the database, instead they are
  forgotten after fifteen months. If your use case require deletes to take
  effect after more than a fifteen month delay, set the
  --db-delete-retention-interval command line option or corresponding
  environment variable to zero, or a longer time interval of your choosing.

• Modernised command line options parsing. Old single-dash long options are
  no longer supported, e.g. -home must be given as --home. Some options
  have been renamed, others have become subcommands. All serve options are
  now also accepted as environment variables. See syncthing --help and
  syncthing serve --help for details.

• Rolling hash detection of shifted data is no longer supported as this
  effectively never helped. Instead, scanning and syncing is faster and more
  efficient without it.

• A "default folder" is no longer created on first startup.

• Multiple connections are now used by default between v2 devices. The new
  default value is to use three connections: one for index metadata and two
  for data exchange.

• The following platforms unfortunately no longer get prebuilt binaries for
  download at syncthing.net and on GitHub, due to complexities related to
  cross compilation with SQLite:

  • dragonfly/amd64
  • solaris/amd64
  • linux/ppc64
  • netbsd/*
  • openbsd/386 and openbsd/arm
  • windows/arm

• The handling of conflict resolution involving deleted files has changed. A
  delete can now be the winning outcome of conflict resolution, resulting in
  the deleted file being moved to a conflict copy.

This release is also available as:

• APT repository: https://apt.syncthing.net/

• Docker image: docker.io/syncthing/syncthing:2.0.15 or ghcr.io/syncthing/syncthing:2.0.15
  ({docker,ghcr}.io/syncthing/syncthing:2 to follow just the major version)

What's Changed

Fixes

• fix(gui): show restarting modal during upgrade restart (fixes #1248) by @steadytao in syncthing/syncthing#10566
• fix(gui): remove width limit for language select items by @EastSun5566 in syncthing/syncthing#10531

Other

• chore(gui): add id and name to Stay logged in checkbox for password managers by @epifeny in syncthing/syncthing#10558
• chore(db): add ability to wait for programmatically started database maintenance, query last maintenance time by @pixelspark in syncthing/syncthing#10565
• chore(etc): add comprehensive sandboxing by @Valloric in syncthing/syncthing#10421
• chore: build with Go 1.26; use Go 1.25 features by @calmh in syncthing/syncthing#10570

New Contributors

• @epifeny made their first contribution in syncthing/syncthing#10558
• @steadytao made their first contribution in syncthing/syncthing#10566
• @EastSun5566 made their first contribution in syncthing/syncthing#10531
• @Valloric made their first contribution in syncthing/syncthing#10421

Full Changelog: syncthing/syncthing@v2.0.14...v2.0.15

v2.0.15-ls211

CI Report:

https://ci-tests.linuxserver.io/linuxserver/syncthing/v2.0.15-ls211/index.html

LinuxServer Changes:

Full Changelog: v2.0.15-ls210...v2.0.15-ls211

Remote Changes:

Major changes in 2.0

• Database backend switched from LevelDB to SQLite. There is a migration on
  first launch which can be lengthy for larger setups. The new database is
  easier to understand and maintain and, hopefully, less buggy.

• The logging format has changed to use structured log entries (a message
  plus several key-value pairs). Additionally, we can now control the log
  level per package, and a new log level WARNING has been inserted between
  INFO and ERROR (which was previously known as WARNING...). The INFO level
  has become more verbose, indicating the sync actions taken by Syncthing. A
  new command line flag --log-level sets the default log level for all
  packages, and the STTRACE environment variable and GUI has been updated
  to set log levels per package. The --verbose and --logflags command
  line options have been removed and will be ignored if given.

• Deleted items are no longer kept forever in the database, instead they are
  forgotten after fifteen months. If your use case require deletes to take
  effect after more than a fifteen month delay, set the
  --db-delete-retention-interval command line option or corresponding
  environment variable to zero, or a longer time interval of your choosing.

• Modernised command line options parsing. Old single-dash long options are
  no longer supported, e.g. -home must be given as --home. Some options
  have been renamed, others have become subcommands. All serve options are
  now also accepted as environment variables. See syncthing --help and
  syncthing serve --help for details.

• Rolling hash detection of shifted data is no longer supported as this
  effectively never helped. Instead, scanning and syncing is faster and more
  efficient without it.

• A "default folder" is no longer created on first startup.

• Multiple connections are now used by default between v2 devices. The new
  default value is to use three connections: one for index metadata and two
  for data exchange.

• The following platforms unfortunately no longer get prebuilt binaries for
  download at syncthing.net and on GitHub, due to complexities related to
  cross compilation with SQLite:

  • dragonfly/amd64
  • solaris/amd64
  • linux/ppc64
  • netbsd/*
  • openbsd/386 and openbsd/arm
  • windows/arm

• The handling of conflict resolution involving deleted files has changed. A
  delete can now be the winning outcome of conflict resolution, resulting in
  the deleted file being moved to a conflict copy.

This release is also available as:

• APT repository: https://apt.syncthing.net/

• Docker image: docker.io/syncthing/syncthing:2.0.15 or ghcr.io/syncthing/syncthing:2.0.15
  ({docker,ghcr}.io/syncthing/syncthing:2 to follow just the major version)

What's Changed

Fixes

• fix(gui): show restarting modal during upgrade restart (fixes #1248) by @steadytao in syncthing/syncthing#10566
• fix(gui): remove width limit for language select items by @EastSun5566 in syncthing/syncthing#10531

Other

• chore(gui): add id and name to Stay logged in checkbox for password managers by @epifeny in syncthing/syncthing#10558
• chore(db): add ability to wait for programmatically started database maintenance, query last maintenance time by @pixelspark in syncthing/syncthing#10565
• chore(etc): add comprehensive sandboxing by @Valloric in syncthing/syncthing#10421
• chore: build with Go 1.26; use Go 1.25 features by @calmh in syncthing/syncthing#10570

New Contributors

• @epifeny made their first contribution in syncthing/syncthing#10558
• @steadytao made their first contribution in syncthing/syncthing#10566
• @EastSun5566 made their first contribution in syncthing/syncthing#10531
• @Valloric made their first contribution in syncthing/syncthing#10421

Full Changelog: syncthing/syncthing@v2.0.14...v2.0.15

v2.0.15-ls210

CI Report:

https://ci-tests.linuxserver.io/linuxserver/syncthing/v2.0.15-ls210/index.html

LinuxServer Changes:

• rebase to 3.23 by @aptalca in #101

Full Changelog: v2.0.14-ls209...v2.0.15-ls210

Remote Changes:

Major changes in 2.0

• Database backend switched from LevelDB to SQLite. There is a migration on
  first launch which can be lengthy for larger setups. The new database is
  easier to understand and maintain and, hopefully, less buggy.

• The logging format has changed to use structured log entries (a message
  plus several key-value pairs). Additionally, we can now control the log
  level per package, and a new log level WARNING has been inserted between
  INFO and ERROR (which was previously known as WARNING...). The INFO level
  has become more verbose, indicating the sync actions taken by Syncthing. A
  new command line flag --log-level sets the default log level for all
  packages, and the STTRACE environment variable and GUI has been updated
  to set log levels per package. The --verbose and --logflags command
  line options have been removed and will be ignored if given.

• Deleted items are no longer kept forever in the database, instead they are
  forgotten after fifteen months. If your use case require deletes to take
  effect after more than a fifteen month delay, set the
  --db-delete-retention-interval command line option or corresponding
  environment variable to zero, or a longer time interval of your choosing.

• Modernised command line options parsing. Old single-dash long options are
  no longer supported, e.g. -home must be given as --home. Some options
  have been renamed, others have become subcommands. All serve options are
  now also accepted as environment variables. See syncthing --help and
  syncthing serve --help for details.

• Rolling hash detection of shifted data is no longer supported as this
  effectively never helped. Instead, scanning and syncing is faster and more
  efficient without it.

• A "default folder" is no longer created on first startup.

• Multiple connections are now used by default between v2 devices. The new
  default value is to use three connections: one for index metadata and two
  for data exchange.

• The following platforms unfortunately no longer get prebuilt binaries for
  download at syncthing.net and on GitHub, due to complexities related to
  cross compilation with SQLite:

  • dragonfly/amd64
  • solaris/amd64
  • linux/ppc64
  • netbsd/*
  • openbsd/386 and openbsd/arm
  • windows/arm

• The handling of conflict resolution involving deleted files has changed. A
  delete can now be the winning outcome of conflict resolution, resulting in
  the deleted file being moved to a conflict copy.

This release is also available as:

• APT repository: https://apt.syncthing.net/

• Docker image: docker.io/syncthing/syncthing:2.0.15 or ghcr.io/syncthing/syncthing:2.0.15
  ({docker,ghcr}.io/syncthing/syncthing:2 to follow just the major version)

What's Changed

Fixes

• fix(gui): show restarting modal during upgrade restart (fixes #1248) by @steadytao in syncthing/syncthing#10566
• fix(gui): remove width limit for language select items by @EastSun5566 in syncthing/syncthing#10531

Other

• chore(gui): add id and name to Stay logged in checkbox for password managers by @epifeny in syncthing/syncthing#10558
• chore(db): add ability to wait for programmatically started database maintenance, query last maintenance time by @pixelspark in syncthing/syncthing#10565
• chore(etc): add comprehensive sandboxing by @Valloric in syncthing/syncthing#10421
• chore: build with Go 1.26; use Go 1.25 features by @calmh in syncthing/syncthing#10570

New Contributors

• @epifeny made their first contribution in syncthing/syncthing#10558
• @steadytao made their first contribution in syncthing/syncthing#10566
• @EastSun5566 made their first contribution in syncthing/syncthing#10531
• @Valloric made their first contribution in syncthing/syncthing#10421

Full Changelog: syncthing/syncthing@v2.0.14...v2.0.15

v2.0.14-ls209

CI Report:

https://ci-tests.linuxserver.io/linuxserver/syncthing/v2.0.14-ls209/index.html

LinuxServer Changes:

Full Changelog: v2.0.14-ls208...v2.0.14-ls209

Remote Changes:

Major changes in 2.0

• Database backend switched from LevelDB to SQLite. There is a migration on
  first launch which can be lengthy for larger setups. The new database is
  easier to understand and maintain and, hopefully, less buggy.

• The logging format has changed to use structured log entries (a message
  plus several key-value pairs). Additionally, we can now control the log
  level per package, and a new log level WARNING has been inserted between
  INFO and ERROR (which was previously known as WARNING...). The INFO level
  has become more verbose, indicating the sync actions taken by Syncthing. A
  new command line flag --log-level sets the default log level for all
  packages, and the STTRACE environment variable and GUI has been updated
  to set log levels per package. The --verbose and --logflags command
  line options have been removed and will be ignored if given.

• Deleted items are no longer kept forever in the database, instead they are
  forgotten after fifteen months. If your use case require deletes to take
  effect after more than a fifteen month delay, set the
  --db-delete-retention-interval command line option or corresponding
  environment variable to zero, or a longer time interval of your choosing.

• Modernised command line options parsing. Old single-dash long options are
  no longer supported, e.g. -home must be given as --home. Some options
  have been renamed, others have become subcommands. All serve options are
  now also accepted as environment variables. See syncthing --help and
  syncthing serve --help for details.

• Rolling hash detection of shifted data is no longer supported as this
  effectively never helped. Instead, scanning and syncing is faster and more
  efficient without it.

• A "default folder" is no longer created on first startup.

• Multiple connections are now used by default between v2 devices. The new
  default value is to use three connections: one for index metadata and two
  for data exchange.

• The following platforms unfortunately no longer get prebuilt binaries for
  download at syncthing.net and on GitHub, due to complexities related to
  cross compilation with SQLite:

  • dragonfly/amd64
  • solaris/amd64
  • linux/ppc64
  • netbsd/*
  • openbsd/386 and openbsd/arm
  • windows/arm

• The handling of conflict resolution involving deleted files has changed. A
  delete can now be the winning outcome of conflict resolution, resulting in
  the deleted file being moved to a conflict copy.

This release is also available as:

• APT repository: https://apt.syncthing.net/

• Docker image: docker.io/syncthing/syncthing:2.0.14 or ghcr.io/syncthing/syncthing:2.0.14
  ({docker,ghcr}.io/syncthing/syncthing:2 to follow just the major version)

What's Changed

Fixes

• fix(beacon): skip point-to-point interfaces on Android by @bt90 in syncthing/syncthing#10504
• fix(stdiscosrv): use fmt.Println for version output (fixes #10523) by @maishivamhoo123 in syncthing/syncthing#10527
• fix(stdiscosrv): log full device ID on startup by @maishivamhoo123 in syncthing/syncthing#10541

Other

• chore(api): remove charset declaration from JSON content-type (fixes #10500) by @prathik8794 in syncthing/syncthing#10508
• chore(sqlite): allow periodic database maintenance to be disabled by @pixelspark in syncthing/syncthing#10441
• chore(gui): include license files for fork-awesome assets by @gotmax23 in syncthing/syncthing#10539
• build: add build attestation step at release by @calmh in syncthing/syncthing#10540

New Contributors

• @prathik8794 made their first contribution in syncthing/syncthing#10508
• @gotmax23 made their first contribution in syncthing/syncthing#10539
• @maishivamhoo123 made their first contribution in syncthing/syncthing#10527

Full Changelog: syncthing/syncthing@v2.0.13...v2.0.14

v2.0.14-ls208

CI Report:

https://ci-tests.linuxserver.io/linuxserver/syncthing/v2.0.14-ls208/index.html

LinuxServer Changes:

Full Changelog: v2.0.14-ls207...v2.0.14-ls208

Remote Changes:

Major changes in 2.0

• Database backend switched from LevelDB to SQLite. There is a migration on
  first launch which can be lengthy for larger setups. The new database is
  easier to understand and maintain and, hopefully, less buggy.

• The logging format has changed to use structured log entries (a message
  plus several key-value pairs). Additionally, we can now control the log
  level per package, and a new log level WARNING has been inserted between
  INFO and ERROR (which was previously known as WARNING...). The INFO level
  has become more verbose, indicating the sync actions taken by Syncthing. A
  new command line flag --log-level sets the default log level for all
  packages, and the STTRACE environment variable and GUI has been updated
  to set log levels per package. The --verbose and --logflags command
  line options have been removed and will be ignored if given.

• Deleted items are no longer kept forever in the database, instead they are
  forgotten after fifteen months. If your use case require deletes to take
  effect after more than a fifteen month delay, set the
  --db-delete-retention-interval command line option or corresponding
  environment variable to zero, or a longer time interval of your choosing.

• Modernised command line options parsing. Old single-dash long options are
  no longer supported, e.g. -home must be given as --home. Some options
  have been renamed, others have become subcommands. All serve options are
  now also accepted as environment variables. See syncthing --help and
  syncthing serve --help for details.

• Rolling hash detection of shifted data is no longer supported as this
  effectively never helped. Instead, scanning and syncing is faster and more
  efficient without it.

• A "default folder" is no longer created on first startup.

• Multiple connections are now used by default between v2 devices. The new
  default value is to use three connections: one for index metadata and two
  for data exchange.

• The following platforms unfortunately no longer get prebuilt binaries for
  download at syncthing.net and on GitHub, due to complexities related to
  cross compilation with SQLite:

  • dragonfly/amd64
  • solaris/amd64
  • linux/ppc64
  • netbsd/*
  • openbsd/386 and openbsd/arm
  • windows/arm

• The handling of conflict resolution involving deleted files has changed. A
  delete can now be the winning outcome of conflict resolution, resulting in
  the deleted file being moved to a conflict copy.

This release is also available as:

• APT repository: https://apt.syncthing.net/

• Docker image: docker.io/syncthing/syncthing:2.0.14 or ghcr.io/syncthing/syncthing:2.0.14
  ({docker,ghcr}.io/syncthing/syncthing:2 to follow just the major version)

What's Changed

Fixes

• fix(beacon): skip point-to-point interfaces on Android by @bt90 in syncthing/syncthing#10504
• fix(stdiscosrv): use fmt.Println for version output (fixes #10523) by @maishivamhoo123 in syncthing/syncthing#10527
• fix(stdiscosrv): log full device ID on startup by @maishivamhoo123 in syncthing/syncthing#10541

Other

• chore(api): remove charset declaration from JSON content-type (fixes #10500) by @prathik8794 in syncthing/syncthing#10508
• chore(sqlite): allow periodic database maintenance to be disabled by @pixelspark in syncthing/syncthing#10441
• chore(gui): include license files for fork-awesome assets by @gotmax23 in syncthing/syncthing#10539
• build: add build attestation step at release by @calmh in syncthing/syncthing#10540

New Contributors

• @prathik8794 made their first contribution in syncthing/syncthing#10508
• @gotmax23 made their first contribution in syncthing/syncthing#10539
• @maishivamhoo123 made their first contribution in syncthing/syncthing#10527

Full Changelog: syncthing/syncthing@v2.0.13...v2.0.14