chore: bump google.golang.org/grpc from 1.67.1 to 1.72.0

[dependabot]

Bumps google.golang.org/grpc from 1.67.1 to 1.72.0.

Release notes

Sourced from google.golang.org/grpc's releases.

Release 1.72.0

Dependencies

• Minimum supported Go version is now 1.23 (#8108)

API Changes

• resolver: add experimental AddressMapV2 with generics to ultimately replace AddressMap. Deprecate AddressMap for deletion (#8187)
• resolver: convert EndpointMap in place to use generics (#8189)

New Features

• xds: add grpc.xds_client.server_failure counter metric on xDS client to record connectivity errors (#8203)
• balancer/rls: allow maxAge to exceed 5 minutes if staleAge is set in the LB policy configuration (#8137)
• ringhash: implement gRFC A76 improvements. (#8159)
• pickfirst: The new pick first LB policy is made the default. The new LB policy implements the Happy Eyeballs algorithm. To disable the new policy set the environment variable GRPC_EXPERIMENTAL_ENABLE_NEW_PICK_FIRST to false (case insensitive).

Bug Fixes

• xds: fix support for circuit breakers and load reporting in LOGICAL_DNS clusters (#8169, #8170)
• xds/cds: improve RPC error messages when resources are not found (#8122)
• balancer/priority: fix race that could leak balancers and goroutines during shutdown (#8095)
• stats/opentelemetry: fix trace attributes message sequence numbers to start from 0 (#8237)
• balancer/pickfirstleaf: fix panic if deprecated Address.Metadata field is set to a non-comparable value by ignoring the field (#8227)

Behavior Changes

• transport: make servers send an HTTP/2 RST_STREAM frame to cancel a stream when the deadline expires (#8071)

Documentation

• stats: clarify the expected sequence of events on a stats handler (#7885)
  • Special Thanks: @​RyanBlaney

Release 1.71.1

Bug Fixes

• grpc: fix a bug causing an extra Read from the compressor if a compressed message is the same size as the limit. This could result in a panic with the built-in gzip compressor (#8178)
• xds: restore the behavior of reading the bootstrap config before creating the first xDS client instead of at package init time (#8164)
• stats/opentelemetry: use TextMapPropagator and TracerProvider from TraceOptions instead of OpenTelemetry globals (#8166)
• client: fix races when an http proxy is configured that could lead to deadlocks or panics (#8195)
• client: fix bug causing RPC failures with message "no children to pick from" when using a custom resolver that calls the deprecated NewAddress API (#8149)
• wrr: fix slow processing of address updates that could result in problems including RPC failures for servers with a large number of backends (#8179)

Release 1.71.0

API Changes

• balancer: Custom LB policies that record metrics must use the new MetricsRecorder method on Balancer.ClientConn instead of the removed Balancer.BuildOptions.MetricsRecorder field to obtain a metrics recorder. (#8027)
• balancer: balancer.ClientConn implementations must now embed a delegate implementation. This allows grpc-go to add new methods to the interface and remain backward compatible. (#8026)
• balancer/endpointsharding: The constructor accepts the child balancer's builder and a struct with optional configuration. (#8052)

... (truncated)

Commits

• a43eba6 Change version to 1.72.0 (#8218)
• 48f48c1 balancer/pickfirstleaf: Avoid reading Address.Metadata (#8227) (#8259)
• fd6f585 Cherry-pick #8159 and #8243 to v1.72.x (#8255)
• 79ca174 stats/opentelemetry: fix trace attributes message sequence numbers to start f...
• 57a2605 xdsclient: fix TestServerFailureMetrics_BeforeResponseRecv test to wait for w...
• 5edab9e xdsclient: add grpc.xds_client.server_failure counter mertric (#8203)
• 78ba661 regenerate protos (#8208)
• 6819ed7 delegatingresolver: Stop calls into delegates once the parent resolver is clo...
• a51009d resolver: convert EndpointMap to use generics (#8189)
• b0d1203 resolver: create AddressMapV2 with generics to replace AddressMap (#8187)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

Summary by Sourcery

Chores:

• Bump google.golang.org/grpc to the latest version

[sourcery-ai]

Reviewer's Guide

This pull request updates the google.golang.org/grpc dependency from version 1.67.1 to 1.72.0. The implementation involves modifying the go.mod file to specify the new version and updating the go.sum file to include the checksums for the new direct and transitive dependencies.

File-Level Changes

Change	Details	Files
Bump google.golang.org/grpc dependency and update transitive dependencies.	Updated google.golang.org/grpc from 1.67.1 to 1.72.0. Updated checksums and versions for transitive dependencies affected by the gRPC bump.	go.mod go.sum

Possibly linked issues

• #0: Updates google.golang.org/grpc, a dependency tracked by the dashboard issue.

---

Tips and commands

Interacting with Sourcery

• Trigger a new review: Comment @sourcery-ai review on the pull request.
• Continue discussions: Reply directly to Sourcery's review comments.
• Generate a GitHub issue from a review comment: Ask Sourcery to create an
  issue from a review comment by replying to it. You can also reply to a
  review comment with @sourcery-ai issue to create an issue from it.
• Generate a pull request title: Write @sourcery-ai anywhere in the pull
  request title to generate a title at any time. You can also comment
  @sourcery-ai title on the pull request to (re-)generate the title at any time.
• Generate a pull request summary: Write @sourcery-ai summary anywhere in
  the pull request body to generate a PR summary at any time exactly where you
  want it. You can also comment @sourcery-ai summary on the pull request to
  (re-)generate the summary at any time.
• Generate reviewer's guide: Comment @sourcery-ai guide on the pull
  request to (re-)generate the reviewer's guide at any time.
• Resolve all Sourcery comments: Comment @sourcery-ai resolve on the
  pull request to resolve all Sourcery comments. Useful if you've already
  addressed all the comments and don't want to see them anymore.
• Dismiss all Sourcery reviews: Comment @sourcery-ai dismiss on the pull
  request to dismiss all existing Sourcery reviews. Especially useful if you
  want to start fresh with a new review - don't forget to comment
  @sourcery-ai review to trigger a new review!

Customizing Your Experience

Access your dashboard to:

• Enable or disable review features such as the Sourcery-generated pull request
  summary, the reviewer's guide, and others.
• Change the review language.
• Add, remove or edit custom review instructions.
• Adjust other review settings.

Getting Help

• Contact our support team for questions or feedback.
• Visit our documentation for detailed guides and information.
• Keep in touch with the Sourcery team by following us on X/Twitter, LinkedIn or GitHub.

[coderabbitai]

Important

Review skipped

Bot user detected.

To trigger a single review, invoke the @coderabbitai review command.

You can disable this status message by setting the reviews.review_status to false in the CodeRabbit configuration file.

---

🪧 Tips

Chat

There are 3 ways to chat with CodeRabbit:

• Review comments: Directly reply to a review comment made by CodeRabbit. Example:
  • I pushed a fix in commit <commit_id>, please review it.
  • Generate unit testing code for this file.
  • Open a follow-up GitHub issue for this discussion.
• Files and specific lines of code (under the "Files changed" tab): Tag @coderabbitai in a new review comment at the desired location with your query. Examples:
  • @coderabbitai generate unit testing code for this file.
  • @coderabbitai modularize this function.
• PR comments: Tag @coderabbitai in a new PR comment to ask questions about the PR branch. For the best results, please provide a very specific query, as very limited context is provided in this mode. Examples:
  • @coderabbitai gather interesting stats about this repository and render them as a table. Additionally, render a pie chart showing the language distribution in the codebase.
  • @coderabbitai read src/utils.ts and generate unit testing code.
  • @coderabbitai read the files in the src/scheduler package and generate a class diagram using mermaid and a README in the markdown format.
  • @coderabbitai help me debug CodeRabbit configuration file.

Support

Need help? Join our Discord community for assistance with any issues or questions.

Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments.

CodeRabbit Commands (Invoked using PR comments)

• @coderabbitai pause to pause the reviews on a PR.
• @coderabbitai resume to resume the paused reviews.
• @coderabbitai review to trigger an incremental review. This is useful when automatic reviews are disabled for the repository.
• @coderabbitai full review to do a full review from scratch and review all the files again.
• @coderabbitai summary to regenerate the summary of the PR.
• @coderabbitai generate sequence diagram to generate a sequence diagram of the changes in this PR.
• @coderabbitai resolve resolve all the CodeRabbit review comments.
• @coderabbitai configuration to show the current CodeRabbit configuration for the repository.
• @coderabbitai help to get help.

Other keywords and placeholders

• Add @coderabbitai ignore anywhere in the PR description to prevent this PR from being reviewed.
• Add @coderabbitai summary to generate the high-level summary at a specific location in the PR description.
• Add @coderabbitai anywhere in the PR title to generate the title automatically.

CodeRabbit Configuration File (.coderabbit.yaml)

• You can programmatically configure CodeRabbit by adding a .coderabbit.yaml file to the root of your repository.
• Please see the configuration documentation for more information.
• If your editor has YAML language server enabled, you can add the path at the top of this file to enable auto-completion and validation: # yaml-language-server: $schema=https://coderabbit.ai/integrations/schema.v2.json

Documentation and Community

• Visit our Documentation for detailed information on how to use CodeRabbit.
• Join our Discord Community to get help, request features, and share feedback.
• Follow us on X/Twitter for updates and announcements.