Fix units and registers

src/pykmp/constants.py

@@ -16,38 +16,133 @@
 
 # Decimals of each variable in the GetRegister command request/response (CID=0x10)
 REGISTERS: Final[Mapping[int, str]] = {
-    0x003C: "Heat Energy (E1)",
-    0x0044: "Volume",
-    0x004A: "Flow",
-    0x0050: "Current Power",
-    0x0056: "Temp1",
-    0x0057: "Temp2",
-    0x0059: "Tempdiff",
-    0x0061: "Temp1xm3",
-    0x006E: "Temp2xm3",
-    0x0071: "Infoevent",
-    0x007B: "MaxFlowDate_Y",
-    0x007C: "MaxFlow_Y",
-    0x007D: "MinFlowDate_Y",
-    0x007E: "MinFlow_Y",
-    0x007F: "MaxPowerDate_Y",
-    0x0080: "MaxPower_Y",
-    0x0081: "MinPowerDate_Y",
-    0x0082: "MinPower_Y",
-    0x008A: "MaxFlowDate_M",
-    0x008B: "MaxFlow_M",
-    0x008C: "MinFlowDate_M",
-    0x008D: "MinFlow_M",
-    0x008E: "MaxPowerDate_M",
-    0x008F: "MaxPower_M",
-    0x0090: "MinPowerDate_M",
-    0x0091: "MinPower_M",
-    0x0092: "AvgTemp1_Y",
-    0x0093: "AvgTemp2_Y",
-    0x0095: "AvgTemp1_M",
-    0x0096: "AvgTemp2_M",
-    0x010A: "E1HighRes",
-    0x03EC: "HourCounter",
+    60: "Heat Energy (E1)",
+    61: "Inlet Energy E4",
+    62: "Outlet Energy E5",
+    63: "Cooling Energy E3",
+    64: "Tariff TA2",
+    65: "Tariff TA3",
+    66: "Tariff limit 2",
+    67: "Tariff limit 3",
+    68: "Volume V1",
+    69: "Volume V2",
+    72: "Mass M1",
+    73: "Mass M2",
+    74: "Flow V1",
+    75: "Flow V2",
+    80: "Current Power",
+    84: "Pulse input A1",
+    85: "Pulse input B1",
+    86: "Temp1",
+    87: "Temp2",
+    88: "Temp3",
+    89: "Tempdiff",
+    91: "Pressure P1",
+    92: "Pressure P1",
+    94: "Heat Energy E2",
+    95: "Tap water energy E6",
+    96: "Tap water energy E7",
+    97: "Temp1xm3 E8", # V1 * t1 (inlet)
+    98: "Target Date",
+    99: "InfoCode",
+    104: "Meter number for VB",
+    110: "Temp2xm3 E9", # V2 * t2 (outlet)
+    112: "Customer Number 2", # 8 most-significant digits
+    113: "Infoevent",
+    114: "Meter number for VA",
+    122: "Temp4",
+    123: "MaxFlowDate_Y",
+    124: "MaxFlow_Y",
+    125: "MinFlowDate_Y",
+    126: "MinFlow_Y",
+    127: "MaxPowerDate_Y",
+    128: "MaxPower_Y",
+    129: "MinPowerDate_Y",
+    130: "MinPower_Y",
+    138: "MaxFlowDate_M",
+    139: "MaxFlow_M",
+    140: "MinFlowDate_M",
+    141: "MinFlow_M",
+    142: "MaxPowerDate_M",
+    143: "MaxPower_M",
+    144: "MinPowerDate_M",
+    145: "MinPower_M",
+    146: "AvgTemp1_Y",
+    147: "AvgTemp2_Y",
+    149: "AvgTemp1_M",
+    150: "AvgTemp2_M",
+    152: "Program number", # not seen on my meters: ABCCCCCC
+    153: "Config number 1", # config no. DDDEE
+    154: "Software Checksum 1",
+    168: "Config number 2", # config no. FFGGMN
+    175: "Error hour counter",
+    178: "Differential energy dE",
+    179: "Control energy cE",
+    180: "Differential volume dV",
+    181: "Control volume cV",
+    # 183: looks like a meter S/N on our Multical 603
+    184: "MbusPriAdrMod1",
+    185: "MbusSekAdrMod1",
+    218: "MbusPriAdrMod2",
+    219: "MbusSekAdrMod2",
+    222: "ConfigChangedEventCount",
+    224: "Pulse input A2",
+    225: "Pulse input B2",
+    229: "T1_average_autoint",
+    230: "T2_average_autoint",
+    234: "l/imp. for VA",
+    235: "l/imp for VB",
+    239: "Volume V1 hires",
+    # Undocumented, but it matches the info given by our Multical 603 in the diagnostics display
+    259: "Nominal Q\N{LATIN SUBSCRIPT SMALL LETTER P}",
+    266: "E1HighRes",
+    267: "Cooling energy E3 hires",
+    346: "Module SW rev",
+    347: "Customer Number",
+    348: "Date and Time", # FIXME unkown unit 79, 28591984415535
+    355: "COP Year",
+    362: "Tariff TA4",
+    364: "Heat energy A1", # Heat energy with discount A1, t2 < t5 limit
+    365: "Heat energy A2", # Heat energy with surcharge A2, t2 > t5 limit
+    366: "T5 limit",
+    367: "COP Month",
+    369: "Info bits",
+    371: "COP",
+    372: "Power Input B1",
+    379: "T1 time average day",
+    380: "T2 time average day",
+    381: "T1 time average hour",
+    382: "T2 time average hour",
+    383: "Flow V1 max year date",
+    # 384: something similar?
+    385: "Power max year date",
+    # 386: something similar?
+    387: "Flow V1 max month date",
+    # 388: something similar?
+    389: "Power max month date",
+    # 390: something similar?
+    398: "T1 actual (one decimal)",
+    399: "T2 actual (one decimal)",
+    # Undocumented, but on Multical 603 it works that way
+    400: "T1-T2 (one decimal)",
+    404: "Meter Type",
+    473: "Energy E10",
+    474: "Energy E11",
+    477: "T3 time average day",
+    478: "T3 time average hour",
+    505: "P1 average day",
+    506: "P2 average day",
+    507: "P1 average hour",
+    508: "P2 average hour",
+    # Undocumented, but it matches the actual interval on Multical 303
+    675: "WM-Bus transmission interval",
+    1001: "Fabrication No",
+    1002: "Time",
+    1003: "Date",
+    1004: "HourCounter",
+    1005: "Software edition",
+    1010: "Customer number 1", # 8 least-significant digits
+    1032: "Operation Mode",
 }
 
 
@@ -73,11 +168,11 @@
     0x12: "kVAh",
     0x13: "MVAh",
     0x14: "GVAh",
-    0x15: "kW",
+    0x15: "W",
     0x16: "kW",
     0x17: "MW",
     0x18: "GW",
-    0x19: "kvar",
+    0x19: "var",
     0x1A: "kvar",
     0x1B: "Mvar",
     0x1C: "Gvar",
@@ -90,7 +185,7 @@
     0x23: "kV",
     0x24: "kA",
     0x25: "°C",
-    0x26: "°K",
+    0x26: "K",
     0x27: "l",
     0x28: "m³",
     0x29: "l/h",
@@ -117,6 +212,12 @@
     0x3E: "days",
     0x3F: "RTC-Q",
     0x40: "Datetime",
+    0x55: "%RH",
+    0x56: "%O\N{SUBSCRIPT TWO}",
+    0x57: "m/s",
+    0x58: "kJ/kg",
+    0x59: "pH",
+    0x5A: "g/kg",
 }