connmgr: Support whitelisting.#3696
Open
davecgh wants to merge 15 commits into
Open
Conversation
This moves the logic related to requesting and advertising addresses to after the handshake completes as opposed to doing it during the handshake in the version message handler. In practice, the overall effect is the same, but moving it to happen after the handshake has at least the following benefits: - It helps ensure no other messages are queued up or sent between the version and verack messages - It keeps the version handler focused on its primary purpose of negotiation and rejection of peers deemed to be unsuitable - It is easier to reason about the sequence of events
This adds the Network method to the addrmgr.NetAddress type so that it can be used as a stdlib net.Addr.
This adds a new context-aware semaphore type with Acquire and Release methods for use in upcoming changes that aim to simplify connection limiting by making use of semaphores for blocking until permits become available.
davecgh
force-pushed
the
connmgr_whitelist
branch
2 times, most recently
from
ca6d391 to
259ba71
Compare
davecgh
force-pushed
the
connmgr_whitelist
branch
4 times, most recently
from
416770e to
94a366f
Compare
This adds tests for the new context-aware semaphore to ensure the acquire, release, and context cancel semantics work as expected.
davecgh
force-pushed
the
connmgr_whitelist
branch
2 times, most recently
from
36205c5 to
31d94b2
Compare
The existing connection manager code was written well before contexts
were introduced. Further, due to the old async model that has now been
converted to a synchronous model, it is based around connection requests
that have their state atomically updated asynchronously as various
things happen.
While it has undoubtedly worked well enough for over a decade, it has
always been a challenge to add new functionality to it and requires the
use of a lot of less than ideal and highly outdated techniques such as
polling for state changes. It is also rather brittle in terms of
requiring output connections to be manually disconnected in the
connection manager after they've been closed to avoid things like
leaking goroutines and failing to update target outbound counts.
Moreover, it only tracks outgoing connections which ultimately forces a
lot of connection-related tasks to be split across different layers
instead of residing in the connection manager itself where they more
naturally belong. Notably, that split, for all intents and purposes,
prevents implementing some desirable more advanced features such as
immediate connection shedding, different connection types, and listeners
tied to specific network types.
With the primary goal of addressing all of the aforementioned points and
providing a solid base to work on for adding new features moving
forward, this significantly reworks the connection manager to completely
get rid of the notion of exposed connection requests in favor of a new
custom connection type that wraps the underlying net.Conn.
The new wrapped connections automatically handle cleanup when closed and
have an associated connection type enum that allows easily
distinguishing inbound, outbound, and manual connections as well as
supporting new connection types in the future.
Another nice feature of the new wrapped connections is they provide
efficient access to concrete parsed address types which paves the way
for avoiding a lot of constant reparsing, repeated host/port splitting
and joining, and generally much more ergonomic immutable address types.
Since changing to wrapped connections basically required a rather
significant rewrite of large portions of the connection manager anyway,
this also takes the opportunity to improve several other aspects of the
connection manager in the process such as implementing full context
support, full tracking of all connection types by the manager itself,
much more robust semaphore-based automatic connection limiting, cleaner
persistent connection handling with independent limits, prevention of
multiple connections of any type to the same address:port, more useful
debug logging, and cleanly closing all connections at during shutdown.
It is also important to note that the following overall semantics have
been intentionally been changed versus the existing connection manager:
- A maximum of 8 persistent connections is now imposed and they no
longer count toward the configured target number of automatic outbound
peers to maintain
- Duplicate addresses (including port) are now rejected by the
connection manager for all types (inbound, outbound, manual,
persistent)
- Note that inbound conns from the same IP will necessarily have
different ports, so the same max IP limits apply in that case
- RPC 'node connect' for all connection attempts now:
- Supports the RPC connection and server contexts
- Properly handles duplicate address rejection including pending
attempts
- RPC 'node connect' for non-persistent conn attempts now:
- Waits for the connection attempt result before returning
- Returns an error if the connection attempt fails
- Cancels the connection attempt if the RPC connection is closed
before it succeeds
- RPC 'node remove' now supports removing a pending connection by its
persistent connection ID (since no peer ID exists before a valid
connection is established)
- It is no longer possible for state transitions to allow things like
duplicate addresses or failed cancellation
The max retry duration is currently an unexported global variable that the tests override at init time. At least one of the tests also additionally overrides it for that specified test too. While this works, it is somewhat brittle and prevents the tests from being run in parallel. This improves the situation by making the max retry duration a field on the connection manager instead of a global variable and adding a test helper for creating a new connection manager that overrides it by default. Then any tests that need a different value can simply override it on their local instance. It also makes the tests parallel since they can no longer clobber one another.
This adds tests to ensure closing a connection multiple times works as intended.
This adds tests to ensure duplication connections are rejected for all possible states.
This adds tests to ensure attempts to add more than the maximum allowed number of persistent are rejected.
This adds tests to ensure the Disconnect method properly disconnects pending and established connections for both non-persistent and persistent connections.
This adds tests to ensure the Remove method properly disconnects and removes pending and established connections for both non-persistent and persistent connections.
This updates the connmgr package README.md to match the new design and capabilities.
Currently the whitelisting logic happens in the server which makes it inaccessible to the connection manager. In order to pave the way for supporting various connection-related logic that currently happens in the server, but ideally should be happening in the connection manager, this adds basic support for whitelisting CIDR prefixes to the connection manager. The connection manager config struct now accepts a slice of prefixes and a new method named IsWhitelisted is added. Note that this only adds support . It does not update anything to use the new functionality yet.
This adds tests to ensure the new whitelist detection method works as expected.
This modifies the server to pass in the parsed whitelist entries to the connection manager config and the relevant code to make use of the new method it exposes. Finally, it removes the no longer used local isWhitelisted method.
davecgh
force-pushed
the
connmgr_whitelist
branch
from
31d94b2 to
b7d952b
Compare
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
1 participant
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
This requires #3695.
Currently the whitelisting logic happens in the server which makes it inaccessible to the connection manager.
In order to pave the way for supporting various connection-related logic that currently happens in the server, but ideally should be happening in the connection manager, this adds basic support for whitelisting CIDR prefixes to the connection manager.
The connection manager config struct now accepts a slice of prefixes and a new method named
IsWhitelistedis added.In a separate commit, it modifies the server to pass in the parsed whitelist entries to the connection manager config and the relevant code to make use of the new method it exposes.
Finally, it removes the no longer used local
isWhitelistedmethod.