YCP_RT_SensorNetwork

This repository contains the Sensor Network code that is run on the Teensy 4.1 microcontroller embedded in the Radio Telescope.

Devoplment setup for teensy 4.1 development

1. Install Visual Studio Code https://code.visualstudio.com/download
2. Open Visual Studio Code
3. Open Extensions Tab

4. Install C/C++ IntelliSense (should be one of most popular extensions) extension

5. Install PlatformIO extension

6. Install Arduino https://www.arduino.cc/en/software

7. Install Teensyduino https://www.pjrc.com/teensy/td_download.html

8. Clone Sensor Network Repository

   1. Open Visual Studio Code
   2. Select source control tab

   

   3. Select Clone Repository
   4. Enter sensor network URL into prompt https://github.com/YCPRadioTelescope/YCP_RT_SensorNetwork.git
      1. IMPORTANT: Place the repo in the following directory - C:\Users%your user%\Documents\PlatformIO\Projects. You may need to create this directory if it does not already exist. This is where all PlatformIO Projects need to be saved.