"Smart Mode" added, which allow learning Realys against multiply DMX channels

[anklimov]

Advanced features - Smart mode (Activated by turning Switch#10 on):

Guidance to use

1. Turn Switch #10 on, rest switches off and restart board
2. Put board in Learning mode by turning Switch #9 on
3. Turn off all DMX light
4. Turn on Switch#1 on and then use all lights, which you want to associate with Relay#1
5. Turn off Switch1 and all DMX lights
6. Repeat learning for channels 2-4 (with appropriate switches 2-4)
7. Turn off Swithc#9 (Learning mode off, all changes will be written to EEPROM)

• When Switch#9 off - Switches 1-8 will define delay, between all DMX channels, associated with Relay turned to off and Relay turned off
  (Relay turnes on immediatelly when at least, 1 associated DMX channel using)