Code and STLs to create a digital planimeter from a mouse sensor.
While it is working and I consider the code complete, it certainly isn't perfect. I've left a few lines of code commented out and there is for sure room for improvement. This is more meant to be an exploration than perfect code and design.
If there is any interest I can write up some detailed instructions on how to get yourself up and running with this code. For right now I'll leave it as it is.
- Seeed Studio Xiao ESP32-C6
- 0.91 inch I2C OLED Display
- Lychee Wireless Optical Pocket Pen Mouse
- PAW3205DB-TJ3T Photosensor
- Shaft encoder
- Scroll wheel
- 40 mAh battery
- Various buttons and switches
All code is released under GPL-3.0 as shown in the LICENSE file. All STLs are released under CC BY-NC-SA 4.0 shown in the stl/LICENSE file. Attribution for any models used in the creation of these STLs can be found in the stl/README.md file.