Xiao esp32S3

[fr3dsant]

I try to use the xiao esp32S3 what firmware you recomend?

[ruvnet]

The Seeed XIAO ESP32-S3 uses the same Xtensa dual-core chip as the standard ESP32-S3, so it is compatible with the RuView firmware.

Which firmware to use:

• XIAO ESP32-S3 (standard, 4 MB flash) → use the esp32-csi-node-4mb.bin firmware
• XIAO ESP32-S3 Sense (8 MB flash) → use esp32-csi-node.bin (8 MB firmware)

Both binaries are in the latest release. The bootloader.bin and partition-table.bin (or partition-table-4mb.bin) must be flashed alongside the main binary.

For step-by-step setup see the tutorial in #34 (ESP32-S3 CSI Pipeline End-to-End Setup), which covers flashing, provisioning WiFi via provision.py, and connecting to the sensing server.

---

Generated by Claude Code

[ruvnet]

The Seeed XIAO ESP32-S3 uses the ESP32-S3 chip and should work with the standard firmware. Flash the 4MB variant (esp32-csi-node-4mb.bin) since XIAO has 8MB flash but the 4MB partition layout fits its typical configuration. See the flashing guide in issue #34 for step-by-step instructions, and use provision.py to set your WiFi credentials and target IP after flashing. The compact form factor of the XIAO makes it a good choice for deployment.

---

Generated by Claude Code