Merge branch 'pidcodes:master' into master

concept-code-design · web-flow · commit d06e5a889c64 · 2025-02-28T16:11:47.000+01:00
diff --git a/1209/2070/index.md b/1209/2070/index.md
@@ -0,0 +1,9 @@
+---
+layout: pid
+title: VG3D Printer
+owner: Vegetronix
+license: GPLv3.0
+site: https://www.vegetronix.com/Products/3D-Printers
+source: https://github.com/Vegetronix-Inc/VG3D-Source-Index
+---
+VG3D Printer Control board which uses forked versions of the stk500v2 bootloader, the PrusaOwners/mk3-32u2-firmware, and the prusa3d/Prusa-Firmware:MK3_3.14.0, and uses the ultimachine/Einsy-Rambo board as its hardware.
diff --git a/1209/2077/index.md b/1209/2077/index.md
@@ -0,0 +1,9 @@
+---
+layout: pid
+title: LoRaptor
+owner: Smuggr
+license: MIT
+site: https://loraptor.smuggr.xyz/
+source: http://github.com/smegg99/LoRaptor/
+---
+LoRaptor is a communication device leveraging the ESP32-S3-MINI-1 microcontroller and the RA-02 LoRa module. It facilitates seamless peer-to-peer communication over a mesh network topology, managed through an intuitive companion application.
diff --git a/1209/2445/index.md b/1209/2445/index.md
@@ -0,0 +1,11 @@
+---
+layout: pid
+title: tk3-paparazzi
+owner: openrobots
+license: BSD
+site: https://git.openrobots.org/projects/tk3-paparazzi
+source: https://git.openrobots.org/projects/tk3-paparazzi/repository
+---
+Custom firmware for the
+[Paparazzi](https://wiki.paparazziuav.org/wiki/Category:Autopilots) boards
+used in the Aerial Robotics Testbed at [LAAS/CNRS](https://www.laas.fr)
diff --git a/1209/2828/index.md b/1209/2828/index.md
@@ -0,0 +1,12 @@
+---
+layout: pid
+title: TotTag
+owner: HedgeTech
+license: Apache-2.0
+site: https://github.com/lab11/socitrack
+source: https://github.com/lab11/socitrack
+---
+The TotTag is a self-contained sensor which utilizes a hybrid ultra
+wideband (UWB) and Bluetooth Low Energy (BLE) radio design to enable
+high-fidelity interaction tracking between devices without requiring
+any supporting infrastructure.
diff --git a/1209/3020/index.md b/1209/3020/index.md
@@ -0,0 +1,9 @@
+---
+layout: pid
+title: LogicAnalyzer
+owner: gusmanb
+license: GPL-3.0
+site: https://github.com/gusmanb/logicanalyzer
+source: https://github.com/gusmanb/logicanalyzer
+---
+Versatile logic analyzer based on the Raspberry Pico
diff --git a/1209/4567/index.md b/1209/4567/index.md
@@ -0,0 +1,11 @@
+---
+layout: pid
+title: Plug-n-Play SAMD21 Development Board
+owner: 4project
+license: MIT
+site: https://github.com/abetis/PlugAndPlay-SAMD21
+source: https://github.com/abetis/EBF
+---
+Plug-n-Play is an Arduino based system of parts that allows easier and permanent connections.
+Allowing easy development with interrupts and power-saving in mind.
+SAMD21 Development board is the first "logic" part in the PnP series.
diff --git a/1209/5AB1/index.md b/1209/5AB1/index.md
@@ -0,0 +1,9 @@
+---
+layout: pid
+title: Futaba
+owner: geek-rabb1t
+license: MIT
+site: https://github.com/geek-rabb1t/futaba
+source: https://github.com/geek-rabb1t/futaba
+---
+Futaba is a keyboard with trackpad.
diff --git a/1209/5C51/index.md b/1209/5C51/index.md
@@ -0,0 +1,9 @@
+---
+layout: pid
+title: BlueSCSI V2
+owner: BlueSCSI
+license: GPL3
+site: https://bluescsi.com
+source: https://github.com/BlueSCSI/BlueSCSI-V2
+---
+An open source SCSI adapter for connecting modern hardware to vintage computer hardware.
diff --git a/1209/8990/index.md b/1209/8990/index.md
@@ -0,0 +1,12 @@
+---
+layout: pid
+title: KVM-Card-Mini K/M port
+owner: Jancgk
+license: MIT
+site: https://github.com/Jackadminx/KVM-Card-Mini
+source: https://github.com/Jackadminx/KVM-Card-Mini
+---
+ KVM-Card-Mini is a plug-and-play KVM (Keyboard Video Mouse) device control card.
+
+The USB data port transfers keyboard and mouse data via HID protocol.
+The USB K/M port is used to emulate a keyboard and mouse.
diff --git a/1209/8991/index.md b/1209/8991/index.md
@@ -0,0 +1,12 @@
+---
+layout: pid
+title: KVM-Card-Mini Data port
+owner: Jancgk
+license: MIT
+site: https://github.com/Jackadminx/KVM-Card-Mini
+source: https://github.com/Jackadminx/KVM-Card-Mini
+---
+ KVM-Card-Mini is a plug-and-play KVM (Keyboard Video Mouse) device control card.
+
+The USB data port transfers keyboard and mouse data via HID protocol.
+The USB K/M port is used to emulate a keyboard and mouse.
diff --git a/1209/C00B/index.md b/1209/C00B/index.md
@@ -0,0 +1,9 @@
+---
+layout: pid
+title: Teensy Keyboard Bridge
+owner: tritoke
+license: apache-2.0
+site: https://github.com/tritoke/teensy-keyboard-bridge
+source: https://github.com/tritoke/teensy-keyboard-bridge
+---
+Computer to computer keyboard bridge.
diff --git a/1209/E004/index.md b/1209/E004/index.md
@@ -0,0 +1,9 @@
+---
+layout: pid
+title: PROVES Kit RP2040 v4
+owner: BroncoSpace
+license: CERN Open Hardware Licence Version 2 - Weakly Reciprocal
+site: https://www.proveskit.space/
+source: https://github.com/proveskit/flight_controller_board/
+---
+PROVES (Pleiades Rapid Orbital Verification Experimental System) Kit RP2040 v4 is an open-source hardware and software platform designed for satellite missions. It provides a cost-effective and reliable solution for conducting scientific experiments in space.
diff --git a/1209/E501/index.md b/1209/E501/index.md
@@ -0,0 +1,9 @@
+---
+layout: pid
+title: KERIgoKBD v1
+owner: kerislab
+license: GPL v2
+site: https://www.kerislab.jp/
+source: https://github.com/kerikun11/kerigokbd
+---
+KERI's Ergonomic Keyboard
diff --git a/1209/EACC/index.md b/1209/EACC/index.md
@@ -0,0 +1,10 @@
+---
+layout: pid
+title: gtfog dfu
+owner: elmaczete_customs
+license: CERN-OHL-S v2
+site: https://github.com/jmacheta/GTFOg
+source: https://github.com/jmacheta/GTFOg
+---
+
+GTFOg - Smart anti-fog system for Airsoft applications - DFU
diff --git a/1209/EACD/index.md b/1209/EACD/index.md
@@ -0,0 +1,10 @@
+---
+layout: pid
+title: gtfog
+owner: elmaczete_customs
+license: CERN-OHL-S v2
+site: https://github.com/jmacheta/GTFOg
+source: https://github.com/jmacheta/GTFOg
+---
+
+GTFOg - Smart anti-fog system for Airsoft applications. 
diff --git a/1209/EAEB/index.md b/1209/EAEB/index.md
@@ -0,0 +1,20 @@
+---
+layout: pid
+title: Pico Controller
+owner: Pinscape
+license: MIT
+site: https://github.com/mjrgh/PinscapePico/
+source: https://github.com/mjrgh/PinscapePico/
+---
+Pinscape Pico is a comprehensive I/O controller for virtual pinball cabinets
+that runs on the Rasbperry Pi Pico (RP2040).  This project is a sequel to the
+original Pinscape KL25Z controller, reimplemented from the ground up for the
+Pico.  It creates a bridge between virtual pinball software on a PC (such as
+Visual Pinball) and the physical input and output devices commonly found in
+virtual pin cabs, including button inputs, plunger sensor inputs, accelerometer
+(for nudge sensing), and feedback-effect devices (lights, solenoids, motors,
+etc).  The Pico communicates with host software on the PC via USB, using a
+variety of standard HID interfaces and custom application-specific interfaces.
+The project includes firmware for the Pico, plus a set of circuit board designs
+for "expansion boards" that supplement the Pico's I/O capabilities with added
+input ports and high-current output ports for feedback devices.
diff --git a/1209/FD42/index.md b/1209/FD42/index.md
@@ -0,0 +1,11 @@
+---
+layout: pid
+title: SAO Digital Multimeter
+owner: HXR.DK
+license: CC-BY-SA (hardware), MIT (Circuit Python firmware)
+site: https://github.com/flummer/dmm-sao
+source: https://github.com/flummer/dmm-sao
+---
+A small digital multimeter that is designed as a badge add-on, following the SAO v1.69 specification. It is using the Raspberry Pi RP2040 and features a small OLED screen, rotating knob, function button and probe terminals, all housed in a 3D printed case.
+
+The firmware is using CircuitPython and the code can easily be hacked, by connecting via USB-C to the RP2040.
diff --git a/6660/index.md b/6660/index.md
@@ -0,0 +1,13 @@
+---
+layout: pid
+title: The Button
+owner: Maebe.Me
+license: GNU GPL v3
+site: https://github.com/maebemae/TheButton
+source: https://github.com/maebemae/TheButton
+---
+A velocity sensitive macro button. Based on the velocity of the button press, a relevant message is typed out.
+
+The project is based on a STM32C071 MCU, with an off the shelf Emergency Mushroom button, and keyswitch.
+
+The firmware uses a mix of STM32CubeMX + STM32 HAL and https://github.com/gbm-ii/gbmUSBdevice as the main usb driver
diff --git a/org/4project/index.md b/org/4project/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: 4project
+site: https://www.4project.co.il/
+---
+The largest electronics, mechanics and robotics parts distributor in Israel.
diff --git a/org/BlueSCSI/index.md b/org/BlueSCSI/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: BlueSCSI
+site: https://BlueSCSI.com
+---
+The BlueSCSI gang develops an open source SCSI emulator for use with vintage computers.
diff --git a/org/BroncoSpace/index.md b/org/BroncoSpace/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: Bronco Space
+site: https://www.broncospace.com/
+---
+Bronco Space, a laboratory at Cal Poly Pomona, is part of the [Open Source Space initiative](https://www.opensource.space/). This initiative aims to make space technology more accessible to pre-college and undergraduate students by providing open source hardware and software designs for satellites.
diff --git a/org/HXR.DK/index.md b/org/HXR.DK/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: HXR.DK
+site: https://hxr.dk/
+---
+Different projects designed by Thomas Flummer, mostly electronics but also a few other things
diff --git a/org/HedgeTech/index.md b/org/HedgeTech/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: HedgeTech
+site: https://github.com/hedgetechllc/
+---
+HedgeTech is a technology contractor and consultant.
diff --git a/org/Jancgk/index.md b/org/Jancgk/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: Jancgk
+site: https://github.com/Jackadminx
+---
+Amateur hardware and software developers
diff --git a/org/Maebe.Me/index.md b/org/Maebe.Me/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: Maebe.Me
+site: http://maebe.me
+---
+A Software Engineer who wants to share the joy of hardware with others
diff --git a/org/Smuggr/index.md b/org/Smuggr/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: Smuggr
+site: https://smuggr.xyz/
+---
+We are a group of passionate students from Poland dedicated to developing FOSS and FOSH. We create various things, from cool IoT gadgets to software solutions.
diff --git a/org/Vegetronix/index.md b/org/Vegetronix/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: Vegetronix
+site: https://www.vegetronix.com/
+---
+A company specializing in agricultural electronics and soil moisture sensors, but we like to create any new project that catches our interest.
diff --git a/org/elmaczete_customs/index.md b/org/elmaczete_customs/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: elmaczete_customs
+site: https://jmacheta.github.io
+---
+Overengineered but robust Hardware Solutions
diff --git a/org/geek-rabb1t/index.md b/org/geek-rabb1t/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: geek-rabb1t
+site: https://github.com/geek-rabb1t
+---
+I make input devices such as keyboards and trackpads as a hobby.
diff --git a/org/gusmanb/index.md b/org/gusmanb/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: Dr. Gusman
+site: https://github.com/gusmanb
+---
+I'm a passionate developer creating open source tools for the community
diff --git a/org/kerislab/index.md b/org/kerislab/index.md
@@ -0,0 +1,6 @@
+---
+layout: org
+title: KERI's Lab
+site: https://www.kerislab.jp/
+---
+Hobby Electronics, Robotics, etc.
diff --git a/org/openrobots/index.md b/org/openrobots/index.md
@@ -0,0 +1,7 @@
+---
+layout: org
+title: Openrobots
+site: https://git.openrobots.org
+---
+Openrobots is a collection of free and opensource software for autonomous
+robots developed at [LAAS/CNRS](https://www.laas.fr).
diff --git a/org/tritoke/index.md b/org/tritoke/index.md
@@ -0,0 +1,7 @@
+---
+layout: org
+title: tritoke
+site: https://github.com/tritoke
+---
+
+A queer software engineer with a love for low level systems
