Newest Bazzite breaks PowerControl!

[Elduderinoca]

Basically does not load. Screenshots attached!

TY!!

[honjow]

Try running this command in the terminal to see. sudo ryzenadj -i

[Elduderinoca]

Hi!

this is what comes up when i run that command while on latest version of Bazzite and v3.5.1 of PowerControl.

no compatible ryzen_smu kernel module found, fallback to /dev/mem
CPU Family: Strix Point
SMU BIOS Interface Version: 21
Version: v0.18.0
Unable to get memory access
Unable to init power metric table: -5, this does not affect adjustments because it is only needed for monitoring.

FYI i rolled back to the Nov 2nd release of Bazzite and it works. If i boot latest again, it doesn't work and i get the errors above.

[honjow]

Hi!

this is what comes up when i run that command while on latest version of Bazzite and v3.5.1 of PowerControl.

no compatible ryzen_smu kernel module found, fallback to /dev/mem CPU Family: Strix Point SMU BIOS Interface Version: 21 Version: v0.18.0 Unable to get memory access Unable to init power metric table: -5, this does not affect adjustments because it is only needed for monitoring.

FYI i rolled back to the Nov 2nd release of Bazzite and it works. If i boot latest again, it doesn't work and i get the errors above.

What device is it? Could it be that it only affected monitoring? Is the TDP setting feature actually working fine?
Or try checking whether the kernel parameters differ between the two sys versions: cat /proc/cmdline

[Elduderinoca]

Hi! It's the GPD Win Mini 2025. I actually only use it for fan controls.

that cmd you asked me to run produced this:

on the working version of Bazzite:
BOOT_IMAGE=(hd1,gpt8)/ostree/default-1331521d8415b70b79c5271a88e687ebe92232bfd921d06e6c83aa6173a9ef66/vmlinuz-6.17.7-ba01.fc43.x86_64 rhgb quiet root=UUID=xxxxxxxxxxxxxxxxxxxxxx rw ostree=/ostree/boot.0/default/1331521d8415b70b79c5271a88e687ebe92232bfd921d06e6c83aa6173a9ef66/0 amdgpu.ppfeaturemask=0xfff7ffff bluetooth.disable_ertm=1 kvm.ignore_msrs=1 kvm.report_ignored_msrs=0

on the newest version of Bazzite:
BOOT_IMAGE=(hd1,gpt8)/ostree/default-9740d1b2fb9bf5ad77f56f5b31e168d88ba25b971af0b694aa5f7cc2d3871c8c/vmlinuz-6.17.7-ba13.fc43.x86_64 rhgb quiet root=UUID=xxxxxxxxxxxxxxxxxxxxxx rw ostree=/ostree/boot.0/default/9740d1b2fb9bf5ad77f56f5b31e168d88ba25b971af0b694aa5f7cc2d3871c8c/0 amdgpu.ppfeaturemask=0xfff7ffff bluetooth.disable_ertm=1 kvm.ignore_msrs=1 kvm.report_ignored_msrs=0

I 'xxxxx'ed out the root uuid

[RG500-Gamma]

Same "unable to get memory access" log shown after running ryzenadj -i here on GPD Win Mini 2025 8840U with Bazzite; however, on my device the PowerControl plugin interface would just be blank or that loading animation with Steam logo.

And I ran into an extra issue.... I reduced clock speed to ~1200MHz for a 2D pixel game's profile, yet after quitting the game, Gamescope main menu became extremely unresponsive with CPU running at 100% but consuming less than 2 to 3W of power. I assume it was caused by per-game profile not being undone on exit. Deleting the plugin and rebooting solves it. Previously everything was working fine. :(

Btw, would someone please recommend an alternative plugin/daemon/etc. for limiting CPU clock speed? I could use it to save around 1 extra watt on lighter games....

[honjow]

Hi! It's the GPD Win Mini 2025. I actually only use it for fan controls.

that cmd you asked me to run produced this:

on the working version of Bazzite: BOOT_IMAGE=(hd1,gpt8)/ostree/default-1331521d8415b70b79c5271a88e687ebe92232bfd921d06e6c83aa6173a9ef66/vmlinuz-6.17.7-ba01.fc43.x86_64 rhgb quiet root=UUID=xxxxxxxxxxxxxxxxxxxxxx rw ostree=/ostree/boot.0/default/1331521d8415b70b79c5271a88e687ebe92232bfd921d06e6c83aa6173a9ef66/0 amdgpu.ppfeaturemask=0xfff7ffff bluetooth.disable_ertm=1 kvm.ignore_msrs=1 kvm.report_ignored_msrs=0

on the newest version of Bazzite: BOOT_IMAGE=(hd1,gpt8)/ostree/default-9740d1b2fb9bf5ad77f56f5b31e168d88ba25b971af0b694aa5f7cc2d3871c8c/vmlinuz-6.17.7-ba13.fc43.x86_64 rhgb quiet root=UUID=xxxxxxxxxxxxxxxxxxxxxx rw ostree=/ostree/boot.0/default/9740d1b2fb9bf5ad77f56f5b31e168d88ba25b971af0b694aa5f7cc2d3871c8c/0 amdgpu.ppfeaturemask=0xfff7ffff bluetooth.disable_ertm=1 kvm.ignore_msrs=1 kvm.report_ignored_msrs=0

I 'xxxxx'ed out the root uuid

It doesn't seem to be caused by kernel parameters. That's strange.

[Elduderinoca]

Is there any other info I could provide? Would love to see this fixed!

[Reiju]

Hi
The same issue on GPD WIN 4 6800u with fresh Bazzite image.