So long .. a new input .. Immersion GHOST & KISS

[artusmuc]

Hello everyone ...

As i want .. i have connected a miniOSD .. a GPS... and a GHOST reciever successfully at

Kiss CompactCtrl and Kiss V1

Thankfull the hard word of fedorcommander .. and the rest of the hardware distributor Fettec / Flyuduino .. and the end ... ImmercionRC ...

First .. guys who tried do "KISS" and Ghost ... never leave 2.0.27....
2.0.29 will not work ... if you ever connected your KissFC to 2.0.29 .. reflash and actived it with 2.0.27 ..
On the bench i have now working

A KissCC with OSD (minimOSD) and with GPS (Beitian) .. and with ghost Protocol ...

OSD is connected to UART 1 ...
GPS is connected to UART (TX of the GPS to UPart) and TX to RX2 on downside of the FC (UART 2)

Ghost is connected to TX3 with "S" on the reciever

And never ever use another GUI than 2.0.27 ...

If you ever use .. reflash and go back to 2.0.27 this is only possible for Win user .. with MacOS only .. no chance

So ... everybody who is invoveld .. great compliments for you work

This is not an Issue --this is a work around i have tested .. as long as flyduino kiss and Fettec are sleeping

[fedorcomander]

You welcome… Works same way on mac btw. For patreon FW u DONT need gui newer then 27 indeed.

…

On 6 May 2021, at 04:01, artusmuc ***@***.***> wrote: Hello everyone ... As i want .. i have connected a miniOSD .. a GPS... and a GHOST reciever successfully at Kiss CompactCtrl and Kiss V1 Thankfull the hard word of fedorcommander .. and the rest of the hardware distributor Fettec / Flyuduino .. and the end ... ImmercionRC ... First .. guys who tried do "KISS" and Ghost ... never leave 2.0.27.... 2.0.29 will not work ... if you ever connected your KissFC to 2.0.29 .. reflash and actived it with 2.0.27 .. On the bench i have now working A KissCC with OSD (minimOSD) and with GPS (Beitian) .. and with ghost Protocol ... OSD is connected to UART 1 ... GPS is connected to UART (TX of the GPS to UPart) and TX to RX2 on downside of the FC Ghost is connected to TX3 with "S" on the reciever And never ever use another GUI than 2.0.27 ... If you ever use .. reflash and go back to 2.0.27 this is only possible for Win user .. with MacOS only .. no chance So ... everybody who is invoveld .. great compliments for you work — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#29>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAQBCCS6PUVTY7SKPNMRZ7DTMHZ67ANCNFSM44GDBGKA>.