OCR does not work on Q670.

[jclab-joseph]

The OCR command works, but there's a problem where the PC freezes. The toolkit is the master branch as of today.

The issue still persists even after updating to CSME version 16.1.38.2676.
Has this been tested on CSME 16.1.X?

PC (AMT) Information

OCR Reset to WinRE

• It goes through WinRE, but PC freezes on WinRE screen (Keyboard/Mouse unusable)

OCR Reset to HTTPS

• PC freezes on POST screen (Keyboard/Mouse unusable)

[graikhel-intel]

Our tests so far have primarily been on NUC14 and NUC15 systems running AMT 18.x and over wired connection.

Could you clarify what you mean by “frozen”?

• Is the KVM viewer (from our Web UI) frozen, or is the actual host system itself unresponsive?
• Do the keyboard and mouse on the host system still work locally?

Thanks for sharing the snapshots --- just to confirm, are these from the KVM session integrated using our UI-Toolkit-Angular/React component?

At first glance, this seems more likely related to BIOS or AMT behavior rather than an issue with MPS or Console.

[jclab-joseph]

The actual host is frozen.
The current screen is HDMI output via PiKVM.
A physical keyboard doesn't work either.

[graikhel-intel]

Thank you for the clarification. Since the host itself is freezing and even a physical keyboard becomes unresponsive, this appears to be related to BIOS or AMT, rather than something originating from Console or MPS.

If you’re already in contact with any Intel account representatives, please include them in an email and add both of us ganesh.raikhelkar@intel.com and minh.t.pham@intel.com, so we can help connect you with the right internal teams to investigate further.

If this turns out to be a BIOS issue, we’ll need to work with the BIOS vendor to ensure it’s addressed and fixed.

[jclab-joseph]

Thank you for your kindness.
I received a fixed BIOS from the motherboard manufacturer, and the issue has been resolved.

Additionally, I have some more in-depth questions about the OCR feature in AMT.
Would it be better to ask them within the issue thread, or should I send them by email?

I’d like to use the OCR feature to boot into a specific MS BCD entry.

To do this, I set BCDOBJECT={guid} in OCR_EFI_BOOT_OPTIONAL_DATA and tried booting into WinRE, but it didn’t work.

I also set the path of bootmgfw.efi in OCR_EFI_FILE_DEVICE_PATH and OCR_EFI_DEVICE_PATH_LEN, along with OCR_EFI_BOOT_OPTIONAL_DATA, but it still didn’t work.

I’m wondering if there’s a way to directly execute a desired EFI path — for example, booting a specific EFI file from the ESP on the default disk with specific optional data.