LoonarBasic/Configuration_Basic.h at master · atedjarati/LoonarBasic · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
/*
Loonar Technologies User Configuration File

CONFIGURE THIS FLIGHT BEFORE FLIGHT!!!!!!!!!!

Copyright 2018 Loonar Technologies, LLC

      THIS SOFTWARE IS PRESENTED WITH THE MIT LICENCE:

* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:

* The above copyright notice and this permission notice shall be included
* in all copies or substantial portions of the Software.

* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
* CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
* WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

*/

#ifndef UserConfiguration_h
#define UserConfiguration_h


/********** LIBRARIES **********/
// None at the moment.


/********** PINOUT **********/
const int BREAKOUT_1 =                 3;    // Breakout pin #1 - Labeled as 'GPIO1' on the Mainboard. Digital input/output only
const int BREAKOUT_2 =                 4;    // Breakout pin #2 - Labeled as 'GPIO2' on the Mainboard. Digital input/output only.
const int BREAKOUT_3 =                 16;   // Breakout pin #3 - Labeled as 'GPIO3/ADC1' on the Mainboard. Digital input/output or analog input only.
const int BREAKOUT_4 =                 A12;  // Breakout pin #4 - Labeled as 'GPIO3/ADC2/DAC' on the Mainboard. Digital input/output or analog input or DAC output only.


/********** USER DEFINED CONSTANTS **********/
const uint8_t  FCCID[6] =              {'A','B','C','D','E','G'};    // FCC Radio License Callsign.
const double   FREQ =                  145.0;                        // Center frequency in MHz for the radio module.
const float    LAUNCH_LATITUDE =       0.0000;                       // Launch Location Latitude
const float    LAUNCH_LONGITUDE =      0.0000;                       // Launch Location Longitude

#endif /* UserConfiguration_h */