test_with_cel_0input.txt

=== input file for capillary_potential.py === DO NOT CHANGE ORDER OF INPUT PARAMETERS ===
===  output prefix; used for all files produced by the program                                  >output_prefix
test_with_cel
=== mage capillary and/or counter electrode (cel) present (yes or no)                           >cel
yes
===  dist of cap tip from cel (or from x = 0 if cel = "no"; same units as bead_radius_cap)      >x_cel_dist
100.
===  number determines counter electrode disk size                                              >n_cel_grid_size
10
===  distance between back wall and cap exit (0. = no back wall; same units as bead_radius_cap) >bwa_dist
10
===  capillary voltage set by power supply (V)                                                  >cap_voltage
1.
===  # of capillary fitting iterations                                                          >n_capfit_iter
20
===  # of cel fit iterations (0 = no charge transfer from img cap to cel)                       >n_celfit_iter
30
===  radius of capillary beads (a.u. or nm)                                                     >bead_radius_cap
1.
===  radius of counter electrode beads (same units as bead_radius_cap)                          >bead_radius_cel
6.
=== radius of back wall beads (same units as bead_radius_cap)                                   >bead_radius_bwa
0.2
===  number of beads in each cap_ring (comma delimited, start & end [] are optional, NO LINE BREAK ALLOWED)
[10,10,10,10,10,10,10,10,10,10,10,10,10,10,12,14,16,18,20,22,24,26,28,30,30,30,30,30,30,30,30,30,30]