Skip to content

live_migration.md

Latest commit

 

History

History
182 lines (125 loc) · 5.04 KB

live_migration.md

File metadata and controls

182 lines (125 loc) · 5.04 KB

Live Migration

This document gives examples of how to use the live migration support in Cloud Hypervisor:

  1. local migration - migrating a VM from one Cloud Hypervisor instance to another on the same machine;
  2. remote migration - migrating a VM between two machines;

⚠️ These examples place sockets in /tmp. This is done for simplicity and should not be done in production.

Local Migration (Suitable for Live Upgrade of VMM)

Launch the source VM (on the host machine):

$ target/release/cloud-hypervisor
    --kernel ~/workloads/vmlinux \
    --disk path=~/workloads/focal.raw \
    --cpus boot=1 --memory size=1G,shared=on \
    --cmdline "root=/dev/vda1 console=ttyS0"  \
    --serial tty --console off --api-socket=/tmp/api1

Launch the destination VM from the same directory (on the host machine):

$ target/release/cloud-hypervisor --api-socket=/tmp/api2

Get ready for receiving migration for the destination VM (on the host machine):

$ target/release/ch-remote --api-socket=/tmp/api2 receive-migration unix:/tmp/sock

Start to send migration for the source VM (on the host machine):

$ target/release/ch-remote --api-socket=/tmp/api1 send-migration --local unix:/tmp/sock

When the above commands completed, the source VM should be successfully migrated to the destination VM. Now the destination VM is running while the source VM is terminated gracefully.

Remote Migration

In this example, we will migrate a VM from one machine (src) to another (dst) across the network. To keep it simple, we will use a minimal VM setup without storage.

Preparation

Make sure that src and dst can reach each other via the network. You should be able to ping each machine. Also each machine should have an open TCP port.

You will need a kernel and initramfs for a minimal Linux system. For this example, we will use the Debian netboot image.

Place the kernel and initramfs into the same directory on both machines. This is important for the migration to succeed. We will use /var/images:

src $ export DEBIAN=https://ftp.debian.org/debian/dists/stable/main/installer-amd64/current/images/netboot/debian-installer/amd64
src $ mkdir -p /var/images
src $ curl $DEBIAN/linux > /var/images/linux
src $ curl $DEBIAN/initrd.gz > /var/images/initrd

Repeat the above steps on the destination host.

Unix Socket Migration

If Unix socket is selected for migration, we can tunnel traffic through "socat".

Starting the Receiver VM

On the receiver side, we prepare an empty VM:

dst $ cloud-hypervisor --api-socket /tmp/api

In a different terminal, configure the VM as a migration target:

dst $ ch-remote --api-socket=/tmp/api receive-migration unix:/tmp/sock

In yet another terminal, forward TCP connections to the Unix domain socket:

dst $ socat TCP-LISTEN:{port},reuseaddr UNIX-CLIENT:/tmp/sock

Starting the Sender VM

Let's start the VM on the source machine:

src $ cloud-hypervisor \
        --serial tty --console off \
        --cpus boot=2 --memory size=4G \
        --kernel /var/images/linux \
        --initramfs /var/images/initrd \
        --cmdline "console=ttyS0" \
        --api-socket /tmp/api

After a few seconds the VM should be up and you can interact with it.

Performing the Migration

First, we start socat:

src $ socat UNIX-LISTEN:/tmp/sock,reuseaddr TCP:{dst}:{port}

Replace {dst}:{port} with the actual IP address and port of your destination host.

Then we kick-off the migration itself:

src $ ch-remote --api-socket=/tmp/api send-migration unix:/tmp/sock

When the above commands completed, the VM should be successfully migrated to the destination machine without interrupting the workload.

TCP Socket Migration

If TCP socket is selected for migration, we need to consider migrating in a trusted network.

Starting the Receiver VM

On the receiver side, we prepare an empty VM:

dst $ cloud-hypervisor --api-socket /tmp/api

In a different terminal, prepare to receive the migration:

dst $ ch-remote --api-socket=/tmp/api receive-migration tcp:0.0.0.0:{port}

Starting the Sender VM

Let's start the VM on the source machine:

src $ cloud-hypervisor \
        --serial tty --console off \
        --cpus boot=2 --memory size=4G \
        --kernel /var/images/linux \
        --initramfs /var/images/initrd \
        --cmdline "console=ttyS0" \
        --api-socket /tmp/api

After a few seconds the VM should be up and you can interact with it.

Performing the Migration

Initiate the Migration over TCP:

src $ ch-remote --api-socket=/tmp/api send-migration  tcp:{dst}:{port}

Replace {dst}:{port} with the actual IP address and port of your destination host.

After completing the above commands, the source VM will be migrated to the destination host and continue running there. The source VM instance will terminate normally. All ongoing processes and connections within the VM should remain intact after the migration.